Husky's 346NE Crowned the new KING.

[bookerdog]

Here is video of a 346NE with 24inch bar modded by TsT.
<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/UdMhlj4xF5w"></param><embed src="http://www.youtube.com/v/UdMhlj4xF5w" type="application/x-shockwave-flash" width="425" height="350"></embed></object>

 

[blsnelling]

That baby's turnin' some Rs in the wood. Who is TsT?

 

[bookerdog]

That baby's turnin' some Rs in the wood. Who is TsT?

Two Stroke Technologies

 

[taplinhill]

24", THATS IMPRESSIVE!!!!!

 

[2000ssm6]

I can't see this 346 vid at work but if it runs like this 026, then it's hot!

http://www.nwchainsaw.com/026hotsawclass.wmv

 

[wanab]

I can't see this 346 vid at work but if it runs like this 026, then it's hot!

http://www.nwchainsaw.com/026hotsawclass.wmv

LMAO!

so now we are taking race saws into the woods?



ya, the 346 is the king but 2K knew that for weeks now, didnt you.





<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/_6KUyxCfxY0&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/_6KUyxCfxY0&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>



BD, that 346 is hot fro' sur' but i think my saw may have a bit more torque.

 

[bookerdog]

This is a work saw and not a race saw. Its running a 24inch bar with 20lp oregon chain.

 

[brncreeper]

24" bar on a 346??? danm!

 

[2000ssm6]

LMAO!

so now we are taking race saws into the woods?



ya, the 346 is the king but 2K knew that for weeks now, didnt you.





<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/_6KUyxCfxY0&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/_6KUyxCfxY0&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>



BD, that 346 is hot fro' sur' but i think my saw may have a bit more torque.

Reread my post Ray Charles, I said I could not watch the video and didn't know what kind of 346 this was.....

 

[2000ssm6]

This is a work saw and not a race saw. Its running a 24inch bar with 20lp oregon chain.

Kool, maybe I can watch the vid when I get off.

 

[SawTroll]

Reread my post Ray Charles, I said I could not watch the video and didn't know what kind of 346 this was.....

I have the same problem at work........:censored:

 

[bookerdog]

Ive gotten some PM that say they can't see the vid. Here is a link hope it helps.

http://www.youtube.com/watch?v=UdMhlj4xF5w

 

[SawTroll]

Ive gotten some PM that say they can't see the vid. Here is a link hope it helps.

http://www.youtube.com/watch?v=UdMhlj4xF5w

The original post worked fine for me, here at home.

Pretty impressive!!

 

[Peacock]

That's impressive!!

It pulls it about as well as a stock 70cc saw!

 

[abohac]

Am I missing part of the video?

I went to a place where someone quoted the original to see the video. Am I seeing it all? Was the video just of someone cutting a log in a shop?

 

[nikocker]

I went to a place where someone quoted the original to see the video. Am I seeing it all? Was the video just of someone cutting a log in a shop?

See post #12 for link.

Al

 

[blsnelling]

Looks like the 260 would smoke the 346NE though.

 

[bookerdog]

That's impressive!!

It pulls it about as well as a stock 70cc saw!

It will pull with my 372 muff modded saw in that size wood. Any larger and I would think the 372 will take over. Im going to try and get video up of it against a stock 681 in 24inch wood. What Im trying to do is get a light weight saw with enough reach on it for a ground saw for logging. Will be logging some property this fall and should have 3 of these ready for ground saws.

 

[Peacock]

It will pull with my 372 muff modded saw in that size wood. Any larger and I would think the 372 will take over. Im going to try and get video up of it against a stock 681 in 24inch wood. What Im trying to do is get a light weight saw with enough reach on it for a ground saw for logging. Will be logging some property this fall and should have 3 of these ready for ground saws.

I think it'll do the job.

How extensive is the porting? I assume it's got a bunch of compression? What kind of free load rpm does it turn and in the cut?

 

[bookerdog]

Looks like the 260 would smoke the 346NE though.

It should A 260 racesaw with race chain and a 20 inch bar