Wraptor talk

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Your opinion is jaded as he is your employer. Plenty of insults and lies from your boss'es side. Your stern words were ignored as I consider you a friend and you also mentioned the same thing to me earlier.

I have him on ignore and this and any other argument between his side and mine will not happen to dirty up a thread again. If he wants to talk to me come in to PM. Love to chat with you there.

I do appreciate you saying one side was presenting facts (me) and the other side personal attacks. The truth is a stranger to that dude and I could list a handful of lies in this thread alone.

The wheel would have been invented if the first person did not invent it. Why do you persist in asserting the device was not invented in this country? You cannot buy your product here and you cannot buy the Wraptor over their. There is no competition except for who had the original concept. The winner of that debate gets a cup of coffee as a prize if he has a buck in his pocket.

oh, treevet you are so mixed up it's clear to all to see what has happened in this thread you cannot hide or try and blame some one else...once more treevet..shame..shame.

And for the record I do not work for Ekka, man get the facts right!

ho hum, this off topic talk is so repetitive with some.

twist away treevet, if it makes you happy..:sucks:
 
It's pointless, I have showed all his posts and lies, but the man cannot read or comprehend. He then does backflips now to the stage of saying I tell all the lies, funny that. Where's his quotes, where's his evidence, what's he got? LIP SERVICE that's all. :deadhorse:

Here's a really funny one, before I get involved have a look at the spray he sends to this member.

I guess that is just the genius that is you dipshiht?

I suppose that one above is my fault too. :notrolls2:
 
Do you run your trucks out of fuel?


It's not like it uses much; we did a demo climb last year with 50-odd people, and I don't think we ran through a full tank on one.
 
Last edited:
I first joined here in '01 or '02. I remember Eric in '04 or '05 when he was just a wee rookie. :cheers:

Some of the faces are still here; lots of new ones.

It's all good.

LOL, I still remember my first post, got edited and I got a PM.

Some guy was asking a really bright question, you know, like the "which chainsaw is best" type of question but it was about chippers. He was asking which he should buy, a 6" or a 12" etc. Now there was all these posts and it was quite boring to read how indecisive people are, so I wrote that he should just buy the 12" and even his woman would prefer 12" over 6" any day. :laugh:

So they edited that out and sent me a PM saying it's not on, but we have progressed a lot from there haven't we when you read what some people write. :givebeer:
 
LMAO @ the 6/12" chipper... I forgot about that thread. Man, that WAS some funny stuff, for sure. :hmm3grin2orange:

101... If you aren't responsible enough to keep your machinery (trucks/chippers/chainsaws/etc) filled with fuel, then whether to use a powered ascender or not is the least of your worries. JMHO. :biggrinbounce2:
 
LMAO @ the 6/12" chipper... I forgot about that thread. Man, that WAS some funny stuff, for sure. :hmm3grin2orange:

101... If you aren't responsible enough to keep your machinery (trucks/chippers/chainsaws/etc) filled with fuel, then whether to use a powered ascender or not is the least of your worries. JMHO. :biggrinbounce2:

Gotcha, good talk..
 
oh, treevet you are so mixed up it's clear to all to see what has happened in this thread you cannot hide or try and blame some one else...once more treevet..shame..shame.

And for the record I do not work for Ekka, man get the facts right!

ho hum, this off topic talk is so repetitive with some.

twist away treevet, if it makes you happy..:sucks:

First of all....I am not going anywhere. This is MY thread and it is you that can go away after coming here to protect your boss (yes you DO work for him) and foul this thread up with your own agenda which is the Ozzie motorized ascender.

This thread is about the Wraptor.....not your device. Do we have to refer to the Wraptor as an "aftermarket" device now? Are all lawnmowers developed after the first one "aftermarket"? Is your Aust. forum an "aftermarket" forum?

Your boss who you work for on the other forum has insulted my country, my trade association, my education, my intelligence, my knowledge, and my honesty. At times on your forum he has insulted my religion. How personal can it get. In the last post I can remember he called me a loser, daft and a thug and referred to me as "frothing". All arguments get personal.....take a look at the smilies....they are all personal. I finally found out how to put him on ignore and did so immediately.

He has lied repeatedly.....why was Treeseer banned? You know and it wasn't because he called him a name. He lied about how he received the Masterblaster crap he has on him. He hates him and bragged about how he can search schit on anyone with his internet skills. He lied about the ISA printing "rehashed material". He lied about the CODIT info I gave him. He lied about not repossesing cars. He told me that is how he got his nickname. And he lied saying he is not fat when he brought this argument from another thread that got personal as well.....
attachment.php


Like I said, I am not going anywhere, this is my thread, and I will be on here until it falls of the bottom of the first page. If you continue to run on about my blame (I will accept half) and another power ascender you cannot even buy here....then you will attain Troll status IMO.
 
I flew one far a long time. Nice lift, and in a rear-mount... hello access.

Looks like a 1230 or 1250 Vermeer behind it.
 
I flew one far a long time. Nice lift, and in a rear-mount... hello access.

Looks like a 1230 or 1250 Vermeer behind it.

You'd be right on the money , I have the LRIII with a 1230 and a ALC55 with a 1250 both nice setups and no payments just paid that machine off thats the best part..
 
The VERY best part, indeed. Been there plenty! :cheers:

Got some nice paint in the plans? That rig will last you a long time if you take care of them, that's for sure.

My last two lifts have been HiRangers, but I'm looking at an LR-III to toss onto my F700 chassis, and a new XT70.

And of course, the Wraptor's there for when you can't get a bucket to the tree; I'm not getting any younger. ;)
 
Last edited:
The VERY best part, indeed. Been there plenty! :cheers:

Got some nice paint in the plans? That rig will last you a long time if you take care of them, that's for sure.

No paint that doesn't make ya money ya know , besides I like the pumpkin , and if you hit that truck than your blind , I have 6 trucks and just by chance two of them are white , the only things that match are the chippers and stumpcutters all yellow..
 
No problem with the orange; just looks like a fresh coat of it might sexy it up for the potentials that see it working.

And you're right- if you can't see that truck, you're blind. I did have a cop get hit years ago when I worked for Asplundh; the woman driver claimed she didn't see the cop.. OR the truck. :help:
 
Status
Not open for further replies.

Latest posts

Back
Top