too-lless chain tensioner. huh???

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The Count

The Count

Addicted to ArboristSite
Joined
Mar 13, 2010
Messages
1,953
Location
Ninove,Belgium
anyone fancy the tool-less chain tensioner?
it seem to me that is the stupidest thing ever.
I prefer the side normal one. the front is ok but gets dirty and is less fun

any of you pros use the tool-less one ?
 
bluesportster02

bluesportster02

fire wood hack
Joined
May 27, 2010
Messages
792
Location
armstrong county pa
Im not a pro but i have a 440 with the tool less chain tensioner and have not had a problem with it. the chain dos'nt come loose during cutting I have cut atleast 10 cords or more with that saw. it is nice to be able to change chains with out tools
 
autis

autis

ArboristSite Member
Joined
Dec 8, 2010
Messages
89
Location
Missouri
personally i cant stand them. my grandpa had a ms210 that had the tool-less crap thing on it and i remember one day messin with that thing for prolly half an hour out in the woods. dont remember what happened with it but it was annoying!! honestly i can see it for old folks that maybe cant tighten the nuts down enough or have arthritis or something but for the common user?? whats wrong with a couple nuts and a screw?? once again stihl tries to fix something that aint broke...like flippy caps!!!!......what are they gonna do next? put an electric starter on their saws?!? or maybe a automatic temperature-sensing winter/summer shutter for the carb? :dizzy:
 
Last edited:
Encore

Encore

ArboristSite Operative
Joined
Jan 4, 2011
Messages
403
Location
Ohio
My Husky has the toolless one. At first it was super aggrivating because lining up the bar with the cover when putting it together is a huge pain in the neck and then it always seemed to come loose, but once I got the hang of it, it's handy.

Not sure how well it'd work on big saws though. I normally like to just set the tension and go (nut system)
 
indiansprings

indiansprings

Firewood Purveyor
Joined
Dec 15, 2008
Messages
4,009
Location
SW Missouri
I've got a little 180 that I've had a quite a while, dosen't get used much any more but the tool less chain tensioner has always worked fine with no issues. None of my other saws have it, I really prefer the traditional style with two bar nuts.
 
SawTroll

SawTroll

Information Collector
Joined
Jan 13, 2005
Messages
64,856
Location
Troms, North Norway
Im not a pro but i have a 440 with the tool less chain tensioner and have not had a problem with it. the chain dos'nt come loose during cutting I have cut atleast 10 cords or more with that saw. it is nice to be able to change chains with out tools

How about flipping the bar then, and cleaning behind it?

I don't know how it is on the Huskys with that stupid and superflous feature, but the Stihl one is discouraging regarding normal maintenance.....:pumpkin2:
 

pgg

Addicted to ArboristSite
Joined
May 26, 2007
Messages
1,460
Location
NZ
The tool-less adjuster contraption on the little light-duty 023 I was given is the worst designed piece of junk in living history. The clowns who designed the stihl tool-less adjusters need a damn good slapping around the ears - and that goes for any stihl dealer who would lower themselves to sell such junk. The designers obviously don't understand that a chainsaw actually collects debris and dirt.

Guess they were never told that when they were handed their engineering degrees in their air-conditioned classrooms at university, with their occasional stroll out onto the manicured back lawn for "theory-testing." And they certainly were never taught the K.I.S.S. principal either.

The nasty and chintzy tool-less contraption attracts crap like a magnet. The ridiculous toothed-wheel contraption and the stupid painful-on-the-finger-tips adjuster knob and floppy-feeling plastic flapper all quickly turn into a useless, stiff, notchy, aggravating pile of annoying shyte with no precision or control. All you end up doing is tearing skin off your fingers. Absolute waste of bloody time.

Did I mention that I'm not impressed with them?? :blob5:
 
sgrizz

sgrizz

ArboristSite Guru
Joined
Aug 21, 2009
Messages
761
Location
pa.
I have on on my 180 and it i never had any issues with it . The only thing i dont like about it is the side cover traps so much crud with the gear that it is a pain in the butt to clean . i thought of switching back to the origonal style.Someone posted about switching but i think it is costly to purchase the parts .
 
fearofpavement

fearofpavement

Trying them all
Joined
Jul 26, 2010
Messages
7,346
Location
middle Georgia
I have the tool less adjuster on an MS180 and really like the saw but could do without that contraption. I don't think it makes anything easier because it is a pain to figure out initially and is a debris collector. I would gladly have just the standard Stihl two nut with side adjuster set up. Also, I would prefer to run the chain tighter than I can get it with the little wheel. So in summation, it isn't terrible but I would never pay 5 cents extra for it. Not sure what it was supposed to achieve.
 
THALL10326

THALL10326

The Champ
Joined
Mar 6, 2004
Messages
20,509
Location
..
The tool-less adjuster contraption on the little light-duty 023 I was given is the worst designed piece of junk in living history. The clowns who designed the stihl tool-less adjusters need a damn good slapping around the ears - and that goes for any stihl dealer who would lower themselves to sell such junk. The designers obviously don't understand that a chainsaw actually collects debris and dirt.

Guess they were never told that when they were handed their engineering degrees in their air-conditioned classrooms at university, with their occasional stroll out onto the manicured back lawn for "theory-testing." And they certainly were never taught the K.I.S.S. principal either.

The nasty and chintzy tool-less contraption attracts crap like a magnet. The ridiculous toothed-wheel contraption and the stupid painful-on-the-finger-tips adjuster knob and floppy-feeling plastic flapper all quickly turn into a useless, stiff, notchy, aggravating pile of annoying shyte with no precision or control. All you end up doing is tearing skin off your fingers. Absolute waste of bloody time.

Did I mention that I'm not impressed with them?? :blob5:

Guess your gonna have slap me then because I sell the hell out of them and oddly no complaints. Course those that buy them aren't people that sit around on AS worrieing about chainsaws, they apparently got better things to do,:laugh::laugh:
 
THALL10326

THALL10326

The Champ
Joined
Mar 6, 2004
Messages
20,509
Location
..
How about flipping the bar then, and cleaning behind it?

I don't know how it is on the Huskys with that stupid and superflous feature, but the Stihl one is discouraging regarding normal maintenance.....:pumpkin2:

Sawtroll if you can't remove one little screw and flip the adjuster and put the bar back on in less than 1 minute then yes maybe its not for you,LOLOLOL
 

pgg

Addicted to ArboristSite
Joined
May 26, 2007
Messages
1,460
Location
NZ
Guess your gonna have slap me then because I sell the hell out of them and oddly no complaints. Course those that buy them aren't people that sit around on AS worrieing about chainsaws, they apparently got better things to do,:laugh::laugh:


T.Hall, I know they all want to complain, but I'm pickin' they're too nervous to go taking their saws back to you, knowing that YOU'LL likely turn around and slap THEIR ears instead... heheh
 
THALL10326

THALL10326

The Champ
Joined
Mar 6, 2004
Messages
20,509
Location
..
T.Hall, I know they all want to complain, but I'm pickin' they're too nervous to go taking their saws back to you, knowing that YOU'LL likely turn around and slap THEIR ears instead... heheh

Haha, they better not come back and complain, I spent an extra 10 minutes getting them to buy those dayummm thngs, opppppppppps,:laugh::laugh::laugh:
 
Top