Roll Tide
Trolltide
I have, but they are people too .:msp_biggrin:
Modding The MS200T
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
Mastermind
Work Saw Specialist
Well......good night to you Sir!!!!! :msp_angry:
garyischofield
ArboristSite Operative
Stihlers or stealers?Just funnnin'.:taped::msp_smile:
garyischofield
ArboristSite Operative
16,926 posts?
Somebody has been A.flapping their gums B.enlightening us Cretans about the finer points of saw modification C. tormenting the AS general populace, aka, spreading love and joy?It's a good thing you don't have 20,000 posts, you wouldn't be able to take those extended vacations.I'm sure keeping the miscreants on "the other swap thread" is a full time job.:msp_wink:
Now Steven you know me better than that. I'm as busy as a one armed paper hanger, but when them filters get here you'll all see the 200T in action.
Somebody has been A.flapping their gums B.enlightening us Cretans about the finer points of saw modification C. tormenting the AS general populace, aka, spreading love and joy?It's a good thing you don't have 20,000 posts, you wouldn't be able to take those extended vacations.I'm sure keeping the miscreants on "the other swap thread" is a full time job.:msp_wink:
deye223
Addicted to ArboristSite
yall no he's so SWEET he's made of suger :byebye:
Mastermind
Work Saw Specialist
Tuned to 14,300 with the mesh filter. 16" B&C
[video=youtube_share;LCKmcItcFdw]http://youtu.be/LCKmcItcFdw[/video]
[video=youtube_share;LCKmcItcFdw]http://youtu.be/LCKmcItcFdw[/video]
bryanr2
Addicted to ArboristSite
Holy ####!:msp_w00t:
Nice work, man you are going to go deaf! Did you time it in the same log before modding? How many more rpm did you get from the good filter?
Mastermind
Work Saw Specialist
Nice work, man you are going to go deaf! Did you time it in the same log before modding? How many more rpm did you get from the good filter?
What did you say????? I can't hear to well.
It was in need of repair when I got it so no before video.
It will easily rev to 15,500 with the mesh filter but it makes the best power at 14,300 or so.
Zombiechopper
Addicted to ArboristSite
What did you say????? I can't hear to well.
It was in need of repair when I got it so no before video.
It will easily rev to 15,500 with the mesh filter but it makes the best power at 14,300 or so.
that coincides with my experiences with stock 200t's. I think they cut the best tuned at around 13,800 even though they can safely be tuned leaner.
which new carb went into this saw? Accel pump version?
I should get you to port a couple of mine. Then I could sell all my bigger saws
nice work.
Mastermind
Work Saw Specialist
that coincides with my experiences with stock 200t's. I think they cut the best tuned at around 13,800 even though they can safely be tuned leaner.
which new carb went into this saw? Accel pump version?
I should get you to port a couple of mine. Then I could sell all my bigger saws
I need to get the number off the box......I just told the dealer, "I need a 200T carb". :msp_wink:
WKEND LUMBERJAK
Addicted to ArboristSite
Mastermind
Work Saw Specialist
That is a nice running saw
I was a little concerned that starting it might be a pain with 190psi.....but I don't see any problem at all.
garyischofield
ArboristSite Operative
heman
For you no problemo.For us average types that will need a decomp.:msp_wink:Great work as usual.That things a little tiger!
I was a little concerned that starting it might be a pain with 190psi.....but I don't see any problem at all.
For you no problemo.For us average types that will need a decomp.:msp_wink:Great work as usual.That things a little tiger!
Mastermind
Work Saw Specialist
For you no problemo.For us average types that will need a decomp.:msp_wink:Great work as usual.That things a little tiger!
You big brute. :msp_w00t:
Very Impressive with a 16" bar. I know it is pine but it cut PDF with the bar buried in it, and all that from a little top handle saw. Like all the work I have seen you post it is outstanding.
Iron Head
ArboristSite Operative
That's crazy cutting power for such a little saw.
Now lets see the 201.
Now lets see the 201.
Zombiechopper
Addicted to ArboristSite
it's in the other thread. 200T is still the king. Although Randy didn't port the 201, just increased compression and advanced timing. I have no idea how you could port that jug. from the pics it looks really tiny in there.
1129 120 0653 is the latest improved carb I believe.
http://www.arboristsite.com/chainsaw/111008.htm#post1752506
Last edited:
