McCulloch Manuals

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'm looking for the following:

McCulloch Shop Manual - P/N 63328 1965 Supplement to Shop Manual 60270,
Mac 3200
ProMac 55 (I believe the Mac 10 shop manual should cover the PM55)

Thanks!

http://www.mediafire.com/?7482587082db2kz

http://www.mediafire.com/?n3663xvh9ussii5

http://www.mediafire.com/?w4rk7019mhk7md6

http://www.smallenginediscount.com/Pro_Mac_55_March_77.pdf

http://www.mymowerparts.com/pdf/McC...nuals-21-600032-07-Mac-3214-IPL-211229-01.pdf

Hmm, as long as we're begging for manuals, I have a 3516 that I have on the bench -- oiler issues. I have the original user's manual somewhere, but IPL and service manual would be super -- Thanks!


http://www.mymowerparts.com/pdf/McC...nuals-21-600035-50-Mac-3516-IPL-211318-01.pdf

http://www.mediafire.com/?lb8q2rk1i111y7w

http://www.mediafire.com/?unroawhtn2wrsz3
 
I hope that I caught up with all of the requests since last time. Let me know if I missed anyone.

Thanks for helping out with the requests Aaron!! :cheers:
 
Hello

Got another one scanned.

McCulloch Shop Manual - P/N 63328
1965 Supplement to Shop Manual 60270

McCulloch0383.jpg


Model 200, 250, 300, 380, 380A, 440, 450, 640

Is the manual still availible
 
Need a manual

I just got a (hand-me-down) McCulloch "Super 10-10" from my Dad and it needs some maintenance. I'm hoping to find a manual and parts list for this device. Can you help me? I can be reached at [email protected]
 
Trying to round up something for my Pro Mac 10-10s I recently acquired. Found the IPL's but was looking for a service or repair type manual. Any help is much appreciated! Email is broncoman76 at hotmail.com!
 
Need Mac 10-10 and PM 605 Service Manuals.

Working on these two I just scored and any help is appreciated. Tried to PM but PM was full.

Great work and help you're doing here. :clap::clap:
 
Trying to round up something for my Pro Mac 10-10s I recently acquired. Found the IPL's but was looking for a service or repair type manual. Any help is much appreciated! Email is broncoman76 at hotmail.com!

I don't know the user name of Roger who sent me the manual but I really do appreciate it!

It had a pile of info in it but was missing the section on the Walbro carb. Anybody have the overhaul procedure for this bad boy? I have a Stens kit for it and am looking for what the heck to do with it! (My first 2 stroke adventure here!)
 
I don't know the user name of Roger who sent me the manual but I really do appreciate it!

It had a pile of info in it but was missing the section on the Walbro carb. Anybody have the overhaul procedure for this bad boy? I have a Stens kit for it and am looking for what the heck to do with it! (My first 2 stroke adventure here!)

It was I. Sorry I do not have a manual on the carb. Do you know what model it is.
 
It was I. Sorry I do not have a manual on the carb. Do you know what model it is.

Hey thanks again 3000 FPS ! I just did some more digging and found some info on the Walbro site (who would have thought to check there??) My carb is a Walbro SDC 44 I think. Unless McCulloch has something different than what they have I might have all that is out there.
 
Hey thanks again 3000 FPS ! I just did some more digging and found some info on the Walbro site (who would have thought to check there??) My carb is a Walbro SDC 44 I think. Unless McCulloch has something different than what they have I might have all that is out there.

Just look at the carb and get the model number from it and then like you did match it up at the walbro site. Good for you.
 
McCulloch used about a dozen different model SDC carburetors but all were very similar. There were small differences in the idle adjust, length/style of the HL screws and a few with remote impulse vs. the integrated impulse on most like the 10 Series.

If you see how one goes together chances are you can service any of them.

Mark
 
Thanks for the manual hookups!

Thanks to 3000 FPS for the manuals hookup. Sent both for the 10-10 and PM 605 and I only asked for the 10-10.

You got Rep.
 

Latest posts

Back
Top