the all aussie dribble thread!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
How cruel, the Landy isn't that slow :p

Not at all Rick. I just followed Neil back through the mountains from his mill to his house a while back and bloody hell, that old buggar can drive...

I mean he can only just see over the dash but I digress...
 
The 3120 lives !

A couples of quick questions.

Is there a seal or O ring that goes on the bar studs through the oil tank ?
Is the rubbing plate supposed to capture the front stud ?

The front stud is pretty damned loose, I've lost it once already into the tank (thank my deity for extendible magnets, I never leave home without one in the toolbox :D) I just might use some bearing retainer to secure and seal the stud.

The brake handle is cactus, been melted by the exhaust so barely works.

Needs an air cleaner top seal too, (or the foam filter, which I'm guessing is the better of the two) and the oiler adjuster is jammed.

But it runs !
Compression is good. Has that nice Husky ringa ding ding to it :D

Oh, and what size are the main bearings ? 6202 or 6203 ?

[edit] I threw a 3/8 rim on it and the 30" bar, just don't have any decent logs kicking around the house ATM.

Hello.





free of hidden charges
 
The Stihl ones mate?
If so yes I have. They are absolutely awesome. Thin, relatively cool, and bloody comfortable. Tough too and no rips despite giving them a fair workout.
Only issue I've had (if you can call it that?) is that they are so thin they don't really offer your legs much protection from bits of wood flying off the chain. My right thigh copped a hiding doing those smaller Casuarinas as when I was madly limbing out the bottoms, especially with the 550XP and 8 pin rim, any bits of branch it grabbed with the chain were shot into my legs like a javelin.
I ended up with some ripper bruises but at least I didn't die of heat stress like when I was wearing those crappy Foresters. Well worth the few hundred bucks. One thing you can't deny is that Stihl accessories are the best by far, regardless of which saw brand you prefer. Always quality gear.

Got a mag cool t shirt on its way for you too when u pick up your darn chain!
 
Talking leaners.

Have a big old dead Box (Neils favourite tree :D) that I need to drop.

IIRC it's about 40" across, a bit of a lean and it's a ####ty old thing dropping branches which is danger to the horses (only dead about twelve months) and it'll provide some good firewood, if i can keep chains up to it.

I was thinking of a conventional scarf but boring in from the sides on the backcut and leaving a strap at the back for support, then severing that as the last cut as the tree looks to my untrained eye as potentially being under a bit of stress with the lean and a potential slabber.

What say the experts ?

sos I'm still stuck on box is sweet red box or mmmm a bit off fine grain black box,,,,,,,,,,ok good now. Your plan sounds just fine or can do it with your eyes shut will impress us and you wont feel a thing :msp_biggrin:
 
Got a mag cool t shirt on its way for you too when u pick up your darn chain!

Why fanks benny :)
When I finally have time to scratch my nuts I'll come down. Tracy working Saturdy mornings now while I babysit so that timeframe also now out for a visit :( Dammit...
 
sos I'm still stuck on box is sweet red box or mmmm a bit off fine grain black box,,,,,,,,,,ok good now. Your plan sounds just fine or can do it with your eyes shut will impress us and you wont feel a thing :msp_biggrin:


White Box, E. Albens, and mate, I always close my eyes, I feel much safer that way :D
 
I was thinking a (bigger) 2100 type 90* pipe would be better Will.

Some foil tape on the brake support might help too, it's amazing how effective some foil can be at reflecting heat.

Whenever I got a new 3120 I just flattened the two tabs in the outlet and didn't have an issue with the brake handle, it was an easy fix if you got to it first up
 
Why fanks benny :)
When I finally have time to scratch my nuts I'll come down. Tracy working Saturdy mornings now while I babysit so that timeframe also now out for a visit :( Dammit...

Just take bubs with you for a car ride,the sleep good in cars :msp_wink:

Just stay away from the beach,you may pass out like i did. :msp_w00t:
 
Last edited:
Bloody hell Rick. Surely you know how this forum works by now?
You're meant to talk crap about it for 12 months, start 14 threads, and when people forget you exist you then have to drop photos in every active thread you can get your mitts on as a pathetic attempt to get in the limelight again.
Videos aren't necessary old son.

I read that i must be out of favour with you oh smiliey one not that it bothers me really dont know you from a bar of pommie soap or want to.

McBob.

P.S This thread is full of it or didn't you notice dribble that is although a four letter word comes to mind that discribles the thread better
 
4 hour round trip though old son. I'm using the bosses POS Triton at the moment with no child safety mounts fitted so that stuffs that idea for at least the next 3 weeks.

howz the new gig going lad, I was up riverina way as you know and from behind the car windshield it seemed hard tough place to make a livin ATM very sad to see many small towns empty looking was my wife I observation as we flew past them
 
Iron bark Euc Sideroxylon with a lean done it for me slabbbed out pop pop pop no biggy just a a fright and no harm, always mindful of with falling any tension wood logs


Just an example of a quota log that exploded soon as i fell it. as the mill started working on it the results are very evident makeing a good quota into fire wood. This log was Silvertop Stringy and, when they do this you cannot do much to get any sawn of value out of it.

attachment.php


attachment.php
 

Latest posts

Back
Top