Mastermind Meets The MS362C-M

[Ron660]

I'm doing two saws right now that arrived near the first of April. I'm slow, but the quality really sucks.

I'd like to see a video of my ported 660, when finished, on that same log. If that was the same log that ported 390xp was on.

 

[Mastermind]

Randy, you make them all great! Which one would you not want to have?

I've not found a 60cc saw that I truly dislike Mike. From the Echo 600P, to the Dolmar 6100, and all that are between.

Does the Stihl tensioner hole on the bars, have to be drilled out to go on the Large mount?

I have an adapter, and a Dolmar 6400 on the way. The Stihl bars are something I have a few of

Moved a little further away from the slot.......or enlarged.

I think one of these will bring it past the 40% threshhold .................

Way past it I'd bet.

 

[Mastermind]

I'd like to see a video of my ported 660, when finished, on that same log. If that was the same log that ported 390xp was on.

That log is almost spent.

 

[Mastermind]

This is what's playing in the shop right now........enjoy.

 

[KG441c]

Im bored!! Im about ready to go listen to how loud my ported toaster is

 

[SCHallenger]

Great thread, good music, & lots of fun in between! Thanks.

 

[dl5205]

Whoa!! lets back up the cut times on the ported 362 was 10,11,11sec. The cut time on the 562 was 10, 12 sec. Thats 11 sec avg. for both saws?

Not to argue, both saws are great, but I saw about 10 sec even for both cuts on the 562.

 

[dl5205]

Randy, as always, I appreciate the time and effort you put into posting your build threads.

Thanks!

 

[KG441c]

I counted several times with the counter. 2nd cut 12 at minimum 11. You r also looking at a conservatively ported 362 with probably 1 tank of fuel through it

 

[KG441c]

I know whats coming next!! I smell a 262xp coming for revenge!

 

[KG441c]

Just my opinion would be alil more massaging in the 362c and alil more aggressive chain would be a different ballgame and also a broken in saw with possibly a 7 pin sprocket. Just a thought but Ill proudly cut firewood with it and smile ear to ear

 

[cgraham1]

Does the Stihl tensioner hole on the bars, have to be drilled out to go on the Large mount?

I have an adapter, and a Dolmar 6400 on the way. The Stihl bars are something I have a few of

For the Dolmar, the bar works fine as is. On a Husky, the oiler hole needs to be drilled out and the bar slot lengthened. It's not too hard to do.

 

[cgraham1]

 

[MustangMike]

Randy, Great song choice, but I think I'd also like to hear WIPEOUT! Seems like a lot of my good friends, who have been following me around this site like groupies, have suddenly stopped posting!!!

 

[Adirondackstihl]

that 562 sounded pissed off at that log ,lol

I got to run my 346 that returned from its vacation this week.
All I have to say is "HOLY SH!T"!!!
My hats off to Randy.
The "pissed off" at the log comment was dead nutz.
I asked for spicy......I got spicy

 

[MustangMike]

Sounds nice Jeremy, something else to bring to GTG! Enjoy!

 

[Adirondackstihl]

Sounds nice Jeremy, something else to bring to GTG! Enjoy!

Might have to ship it down, I don't think Phil will let a Husky ride in the truck

 

[Mastermind]

Might have to ship it down, I don't think Phil will let a Husky ride in the truck

You need to use it to shower that dipsh!t with chips every time y'all cut together.

 

[Adirondackstihl]

You need to use it to shower that dipsh!t with chips every time y'all cut together.

ROFLMAO


Now I gotta get that junk collector to grind me sum chain.

 

[MasterMech]

Randy has an azz load of work.
He needs a little help!

Where do I apply?