Mastermind Meets The MS362C-M

[Alongshot]

Not to argue, both saws are great, but I saw about 10 sec even for both cuts on the 562.

I Agree

I counted several times with the counter. 2nd cut 12 at minimum 11. You r also looking at a conservatively ported 362 with probably 1 tank of fuel through it

Don't know what your counting w/. I used a stopwatch on my phone, Both cuts for the 562 came in just under 10 sec (roughly 9.8). first cut for the 362 I had at about 10.6 sec second was around 11.5 third was around 11.8sec . not sure where your seeing 12sec on either of the cuts w/the 562.

 

[KG441c]

I Agree


Don't know what your counting w/. I used a stopwatch on my phone, Both cuts for the 562 came in just under 10 sec (roughly 9.8). first cut for the 362 I had at about 10.6 sec second was around 11.5 third was around 11.8sec . not sure where your seeing 12sec on either of the cuts w/the 562.

Good deal. Thanks for clarifying

 

[bryanr2]

Once I get my 362C back, this thread will be at the top for some time.

I have a 555 and 6400 to run the ported 362 against. Gonna make a shootout video or 2.

just a reminder..... we want to see a video of that 362cm against the 665.

 

[DexterDay]

Working 12 hrs this weekend, so my time is slightly limited.

I have a friend coming over a we are gonna test numerous 60 cc saws and I should be able to get some very good video there.

 

[CR888]

opcorn:opcorn:...l wanna see Kennis give that Solo 665 some 'testing' when comparing the 60cc class saws.

 

[DexterDay]

opcorn:opcorn:...l wanna see Kennis give that Solo 665 some 'testing' when comparing the 60cc class saws.

Thanks bud.. How is the Dolly and 555?

 

[Mastermind]

opcorn:

 

[Hedgerow]

 

[Mastermind]

Is this thing even on???????

Breaker, breaker........come back for a radio check......

 

[KG441c]

Is this thing even on???????

Breaker, breaker........come back for a radio check......

This is Roscoe go ahead Boss Hog!! Lmao!!

 

[Mastermind]

LMAO!!!!!

 

[Trx250r180]

Did i hear a rubber ducky ?

 

[cgraham1]

Me too. opcorn:

 

[MustangMike]

I'll be able to post something in not too long!

 

[KG441c]

Im testing 87 octane vs vp94 in the 362c Thursday and will post videos

 

[Mastermind]

I'll be able to post something in not too long!

I just received a MS362 from UPS.......

Im testing 87 octane vs vp94 in the 362c Thursday and will post videos

Which oil, at what ratio?

 

[KG441c]

BELRAY H1R at 32to1.

 

[MustangMike]

I just received a MS362 from UPS.......



Which oil, at what ratio?

Don't forget to check under the bonnet before you fire her up!

 

[MustangMike]

BELRAY H1R at 32to1.

You won't need much octane in the gas with that ratio. The lower octane will likely run better, but if you have a temp gauge, check it.

 

[KG441c]

I have the fluke laser temp. Check meter. Where do u shoot it to check the temp?