Mastermind
Work Saw Specialist
Brian and Matt both do good chain.
I like a square ground .325 on that saw.
I like a square ground .325 on that saw.
Mastermind Meets The MS362C-M
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
Randy, I have been pondering what you do with the carb intake on the strato saws today so I tore down my 261 tonite.
From what I saw I believe the tube at roughly 10 o'clock looking at the carb with the plastiic spacer off is the strato intake? Have you messed with changing the strato charge on the 261?
Sorry to derail the fun in this thread with some tech. My CDO brain wants to know.
From what I saw I believe the tube at roughly 10 o'clock looking at the carb with the plastiic spacer off is the strato intake? Have you messed with changing the strato charge on the 261?
Sorry to derail the fun in this thread with some tech. My CDO brain wants to know.
Mastermind
Work Saw Specialist
On the intake side of the 261 I just remove the divider in the air filter base.
bryanr2
Addicted to ArboristSite
i like the one in the MIDDLE!
weedkilla
Ain't no guru of nuthin'
Thanks. Great thread.
Hedgerow
HACK
Anything to help feed Phil a husky sandwich...ROFLMAO
Now I gotta get that junk collector to grind me sum chain.
KenJax Tree
Terraphobic
Make a BLT while you're at it.
Hedgerow
HACK
They're super smooth work chains, I'm still filing the one you sent with the Deere...
But these saws got enough ass to pull a 3/8 square for speed...
Hedgerow
HACK
Something tells me you'd take to a Fordham like a duck to water....
MasterMech
ArboristSite Operative
I'm young, dumb, and still learning.
. I have taken a Dremel to a cylinder before with decent results but I by no means had a clue.
Mastermind
Work Saw Specialist
I'm young, dumb, and still learning.
Don't be crowding in on the work.
KG441c
Keith
bryanr2
Addicted to ArboristSite
getting pretty close to 30k messages randy.
MasterMech
ArboristSite Operative
I'm up to my ass in mowers and other repairs right now. Happy to leave the hot-roddin' to the pros.
Mastermind
Work Saw Specialist
Yeah you did get a deal.
getting pretty close to 30k messages randy.
WooT wOOt
Thank goodness........I'd hate to get put outta work.
bryanr2
Addicted to ArboristSite
Yeah you did get a deal.
WooT wOOt
Thank goodness........I'd hate to get put outta work.
Im just waiting on some new models and it's gonna be CAD in "full affect"
Randy, I see you incorporated SAR in your logo, Very Nice!!! Also needed to make another post to this thread so it does not die too quickly!!!!
DexterDay
Addicted to ArboristSite
Once I get my 362C back, this thread will be at the top for some time.
I have a 555 and 6400 to run the ported 362 against. Gonna make a shootout video or 2.
I have a 555 and 6400 to run the ported 362 against. Gonna make a shootout video or 2.
KG441c
Keith
Lol!! I hear you Dexter! Wished I lived close so w e could run the 362 against one another. Im redoing an 026 pro top to bottom and porting it right now. Occupying my mind until that 362c gets back!!!Once I get my 362C back, this thread will be at the top for some time.
I have a 555 and 6400 to run the ported 362 against. Gonna make a shootout video or 2.
Mastermind
Work Saw Specialist
I'm gonna ship Keith's back Friday. I was gonna go back in, but I'd rather him put a little time on it. If I hang onto it till the next 362 is up, I'll have it a few more weeks at least.
