Sure is quiet in here....do I need to start a fight?

shop deals on amazon
Advertise with us
Wesspur
Shop deals on ebay
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
pioneerguy600 said:
We have a weather event coming but just have to wait and see. The sun made it a little more bearable this afternoon for a while but now its getting colder again as the sun gets lower. This is true winter weather, we got off easy the first half also. Good to hear from you Bobby, hope all ios well with you and yours.
Click to expand...
Same with you Jerry!!!
 
Cantdog said:
About halfway through the storm I guess.......ventured outside for a minute.....didn't like it all that much......

View attachment 557868 View attachment 557870 View attachment 557871 View attachment 557872
Click to expand...
NOAA Mosaic Radar shows you getting globbered rt now! Storm seems to be stalled up near PE and NS! Looks like we got more than you! LOL from last 2! We're about done I hope Tides 12:51 but there's lake affect moving in from WNW. 9WC winds still blowin'.
Have a flock of Turkeys out here hangin' around for some seeds ect and to shelter from the wind and snow!
 
Cantdog said:
About halfway through the storm I guess.......ventured outside for a minute.....didn't like it all that much......

View attachment 557868 View attachment 557870 View attachment 557871 View attachment 557872
Click to expand...
NOAA Mosaic Radar shows you getting globbered rt now! Storm seems to be stalled up near PE and NS! Looks like we got more than you! LOL from last 2! We're about done I hope Tides 12:51 but there's lake affect moving in from WNW. 9WC
pioneerguy600 said:
Real nice beach day here, it would be a beach to be there!!
Click to expand...
Waves 25ft down Plymouth Beach.
 
emeraoval_20170213-144720_fhSpvbdGQnmF2Kt7.jpg
 
cheeves said:
:) Like my 262 though!
Click to expand...
But you do have these 026's down to a Science!!
God Bless you for that!! Got 15 loads before the snow flew.....90% with your 026! With my back no way I'd gotten 15 loads without "Mighty Mouse!"
Got some Woodland Pro chisel for it and put it on the Belsaw without even using it! Filed the rakers down some and that saw just eats wood! All dead standing Oak!
 
pioneerguy600 said:
I cut the wood I am burning this winter more than a year ago, wood has dried two summers, with my Stihl saws. This summer/early fall I cut some wood up at the camp with the lil Husky 45, that wood is still really green n wet, not good burning right now.
Click to expand...
Lucky.....around here in the woods left there's an abundance of dead standing oak. What I mostly burn! This fall found a nice Honey Hole that I worked. Still some left.....But you really gotta search now. Good thing I know the area!! Largest County in Mass.......which ain't sayin' a lot!
 
cheeves said:
But you do have these 026's down to a Science!!
God Bless you for that!! Got 15 loads before the snow flew.....90% with your 026! With my back no way I'd gotten 15 loads without "Mighty Mouse!"
Got some Woodland Pro chisel for it and put it on the Belsaw without even using it! Filed the rakers down some and that saw just eats wood! All dead standing Oak!
Click to expand...

If you like that saw Bobby you wouldn`t believe the one I am running now for personal use. The latest one I have been experimenting with has a very substantial gain over the older saws I ported. This porting stuff never stops evolving and we are never satisfied just leaving things as they are. I have a good number of 026`s out there being test run and the consensus is they do a good job and are holding up really well. Very happy to hear yours is still doing its job and treating you well.
I want to continue running my latest build til it proves whether the saw can stay together running at the RPM`s it does. It has about 30 hours on it now and never ceases to impress me. There is another saw porter over State side that likes porting on these 026`s and we compare notes and share improvements between us. When I do a compare a stock 026 to the one I run now there is a wide/huge power and speed difference. Dan and I have cut off a good deal of wood this past year and the 026`s have done the majority of the cutting for me, I use these saws now for wood I would have run bigger saws on before the improvements that have come about by experimenting.
 
cheeves said:
Lucky.....around here in the woods left there's an abundance of dead standing oak. What I mostly burn! This fall found a nice Honey Hole that I worked. Still some left.....But you really gotta search now. Good thing I know the area!! Largest County in Mass.......which ain't sayin' a lot!
Click to expand...

We cannot keep up with the firewood cutting and clearing jobs coming our way lately, there is already more standing dead than we can handle with more showing up daily plus all the building lot and powerline/road clearing jobs, nothing but fun, fun ,fun!
 
cheeves said:
Lucky.....around here in the woods left there's an abundance of dead standing oak. What I mostly burn! This fall found a nice Honey Hole that I worked. Still some left.....But you really gotta search now. Good thing I know the area!! Largest County in Mass.......which ain't sayin' a lot!
Click to expand...
pioneerguy600 said:
If you like that saw Bobby you wouldn`t believe the one I am running now for personal use. The latest one I have been experimenting with has a very substantial gain over the older saws I ported. This porting stuff never stops evolving and we are never satisfied just leaving things as they are. I have a good number of 026`s out there being test run and the consensus is they do a good job and are holding up really well. Very happy to hear yours is still doing its job and treating you well.
I want to continue running my latest build til it proves whether the saw can stay together running at the RPM`s it does. It has about 30 hours on it now and never ceases to impress me. There is another saw porter over State side that likes porting on these 026`s and we compare notes and share improvements between us. When I do a compare a stock 026 to the one I run now there is a wide/huge power and speed difference. Dan and I have cut off a good deal of wood this past year and the 026`s have done the majority of the cutting for me, I use these saws now for wood I would have run bigger saws on before the improvements that have come about by experimenting.
Click to expand...
What oil you run? Run Amsoil 40:1 with Startron!
Have any latest production you want to sell?
My old Orange Top 44 in Ohio ran 14,800 for ten years! Ran Golden Spectro in it! Just finally found one. Been looking for 35 years! But it doesn't run like my old one! Little disappointed tell yah the truth. If I didn't have your saw would probably be bummin'! LOL
 

Similar threads

teacherman
Opinions on Forester chain compared to Stihl
2 3 4
Replies
67
Views
4K
NSEric
N
M
So I rolled the dice.... Echo CS-590
Replies
9
Views
963
HumBurner
HumBurner
P
In the market for a bigger saw
2 3
Replies
40
Views
3K
Pjohnson
P
H
Overthinking Joncutter g5800 bar choice
Replies
5
Views
504
echomeister
E
ace4059
Possible new bad gas. What should I do?
6 7 8
Replies
155
Views
9K
Smitty Smithsonite
Smitty Smithsonite

Latest posts

Back
Top