poleframer
ArboristSite Operative
Hi all, I'm not new to chainsaw repair by a ways, but this little guy sort of has me stumped.
Not idleing well, tho it runs great, just wont idle, no matter how I adjust, so I'm taking the carb off for a good cleaning and check.
After removing the two long screws its loose, it wiggles, cant see anything holding it onto the intake boot, but it just dosnt want to come off, and I dont want to pull too hard,
I do see that I can get an allen wrench through the holes where the long screws were to allen bolts at the base of the intake boot, but looks like a pita to get them back. Never worked on one of these little echo saws, been through many rebuilds of ms200s, and other saws.
I'd expect it similar to the cs 2511t. I tried to find a Utube vid, nothing there.
Anyone remove the carbs on one of these that can give me a tip?
Thanks, Russell
Not idleing well, tho it runs great, just wont idle, no matter how I adjust, so I'm taking the carb off for a good cleaning and check.
After removing the two long screws its loose, it wiggles, cant see anything holding it onto the intake boot, but it just dosnt want to come off, and I dont want to pull too hard,
I do see that I can get an allen wrench through the holes where the long screws were to allen bolts at the base of the intake boot, but looks like a pita to get them back. Never worked on one of these little echo saws, been through many rebuilds of ms200s, and other saws.
I'd expect it similar to the cs 2511t. I tried to find a Utube vid, nothing there.
Anyone remove the carbs on one of these that can give me a tip?
Thanks, Russell