H Homer6679 ArboristSite Operative Joined Jul 25, 2022 Messages 206 Reaction score 180 Location Washington, USA Nov 26, 2022 #1 Just picked this up for about 7 bucks, I thought these could only run 20” B/C. It has a 32” on with full skip chain on it. Can this saw run this setup? Attachments 38370A2E-AC36-4ACE-827B-2CA1BA00E47A.jpeg 2.5 MB · Views: 0 0C7F17DF-951D-48A4-A40B-31B9F4EA442A.jpeg 1.4 MB · Views: 0
Just picked this up for about 7 bucks, I thought these could only run 20” B/C. It has a 32” on with full skip chain on it. Can this saw run this setup?
cookies Addicted to ArboristSite AS Supporting Member. Joined Nov 26, 2020 Messages 2,348 Reaction score 4,154 Location Crawfordville Nov 26, 2022 #2 yea it will run it if your using it to cut limbs, probably best to stay 20"and under if your planning to cut stuff over 8 inches thick.
yea it will run it if your using it to cut limbs, probably best to stay 20"and under if your planning to cut stuff over 8 inches thick.
K KASH ArboristSite Guru AS Supporting Member. Joined Nov 4, 2004 Messages 968 Reaction score 1,317 Location ontario canada Nov 26, 2022 #3 16 or18 inch are the best for the o32 you can cut 34 inch so why would you want to go longer with a 52cc saw. Kash The 032 is one of my favorite saws.
16 or18 inch are the best for the o32 you can cut 34 inch so why would you want to go longer with a 52cc saw. Kash The 032 is one of my favorite saws.
H Homer6679 ArboristSite Operative Joined Jul 25, 2022 Messages 206 Reaction score 180 Location Washington, USA Nov 26, 2022 #4 I agree, I’m going to be getting a smaller bar for it. I was just curious if that saw could even run that B/C set up
I agree, I’m going to be getting a smaller bar for it. I was just curious if that saw could even run that B/C set up