cuinrearview
Red saw lover
Please check out the pics. This saw sustained some peripheral damage from what looks like something falling on it. I do not know the history but I completely re-built it. The notable areas were the bulkhead area where the ignition wires pass through and the cylinder fin near the spark plug. The top cover is not correct, but the replacement was drilled for the de-comp. The hold down nut and grommet are missing. There is some slight melting on the cover and the brake flag. The saw functions fine, I just want full disclosure.
That's the bad, the saw runs great and has no issues doing what it's supposed to. New parts are:
Crank bearings and seals, fuel and impulse lines, intake manifold, carb kit, Meteor piston with Caber rings. It has no base gasket and the timing has been advanced. All parts are OEM aside from the piston and rings and the Nachi flywheel side bearing. I've put a half tank of fuel through it and it's ready to put wood in someone else's stove. If you have any questions or would like more pics please ask. I'd like $315 for this one PHO.
That's the bad, the saw runs great and has no issues doing what it's supposed to. New parts are:
Crank bearings and seals, fuel and impulse lines, intake manifold, carb kit, Meteor piston with Caber rings. It has no base gasket and the timing has been advanced. All parts are OEM aside from the piston and rings and the Nachi flywheel side bearing. I've put a half tank of fuel through it and it's ready to put wood in someone else's stove. If you have any questions or would like more pics please ask. I'd like $315 for this one PHO.