Uncle Rico
ArboristSite Operative
I'm giving up on my 066. A couple years ago I put in the NWP big bore P&C, new bearings, seals, after market modified muffler and all new rubber. With some tuning help from another member it ran great, for awhile. I've sprung a couple air leaks since, and after the latest, I've had enough. P&C look okay to me, but I have a new piston and rings that I'll include. There are stripped threads on the two top screws on the top cover, can probably be fixed with a helicoil? but I've never worked with them. There is also a crack around one of the buffer screws. I've put a few aftermarket oil seals in and something isn't working out.
The saw ran fine this year until yesterday, it failed after a few cuts and wouldn't power up, so I'm assuming there is another leak. I've milled a little with it but mostly noodling. It's a strong saw when it's not leaking, hopefully someone can figure this thing out.
I'm thinking $350 shipped PHO. I would be interested in trades on a big husky. I have a nice running 026 with a new 18" b&c I could include in trade.
Let me know,
Richard
The saw ran fine this year until yesterday, it failed after a few cuts and wouldn't power up, so I'm assuming there is another leak. I've milled a little with it but mostly noodling. It's a strong saw when it's not leaking, hopefully someone can figure this thing out.
I'm thinking $350 shipped PHO. I would be interested in trades on a big husky. I have a nice running 026 with a new 18" b&c I could include in trade.
Let me know,
Richard
Attachments
-
Copy of IMG_1879.JPG788.3 KB · Views: 132
-
Copy of IMG_1880.JPG834.4 KB · Views: 138
-
Copy of IMG_1882.JPG637.9 KB · Views: 133
-
Copy of IMG_1884.JPG573.4 KB · Views: 129
-
Copy of IMG_1885.JPG1.3 MB · Views: 138
-
Copy of IMG_1887.JPG1.3 MB · Views: 129
-
Copy of IMG_1888.JPG1.4 MB · Views: 133
-
Copy of IMG_1895.JPG1.3 MB · Views: 130
-
Copy of IMG_1896.JPG683.3 KB · Views: 119
-
Copy of IMG_1894.JPG844.4 KB · Views: 103