103cc's of raw screaming madness yes i know i suck

[WKEND LUMBERJAK]

here is the vid,, this is solid red oak,, dang it runs good,, the 1st couple of chunks I was checking the tune before I turned the vid on

<iframe width="420" height="315" src="http://www.youtube.com/embed/R_018-VULRE" frameborder="0" allowfullscreen></iframe>

That is a nice saw sounds good to. I bet that MM did help. Can't wait to see the video.:msp_thumbup::msp_thumbup:

 

[o8f150]

going to cut with it tomorrow and see if it has picked up any,, and yes I will do a vid

 

[o8f150]

did a MM on her last night and run in the same log as before but I don't see a huge improvement,, has a bit more torque and is louder,,
before the MM,,, it is the same log and chain
<iframe width="420" height="315" src="http://www.youtube.com/embed/R_018-VULRE" frameborder="0" allowfullscreen></iframe>
after the MM
<iframe width="420" height="315" src="http://www.youtube.com/embed/pXQDJAgsiAY" frameborder="0" allowfullscreen></iframe>

 

[WKEND LUMBERJAK]

did a MM on her last night and run in the same log as before but I don't see a huge improvement,, has a bit more torque and is louder,,
before the MM,,, it is the same log and chain
<iframe width="420" height="315" src="http://www.youtube.com/embed/R_018-VULRE" frameborder="0" allowfullscreen></iframe>
after the MM
<iframe width="420" height="315" src="http://www.youtube.com/embed/pXQDJAgsiAY" frameborder="0" allowfullscreen></iframe>

Did you touch up the chain.

 

[Erock]

Possible stupid question, is Solo owned by Husky? Cause that looks like a Husky, least a Jonsered...Guess I don't know how that all works with companies owning different brands and looking very much alike and all...

 

[buck futter]

Power head looks small for 103. Can you take the cyl cover off I want to see if it looks like the 667 I have.

 

[adam32]

Power head looks small for 103. Can you take the cyl cover off I want to see if it looks like the 667 I have.

Totally different saws...the 662 and 667 are on the same platform. The 670/680/690/603 are on the same.

The 680 and 690 will outrun the 603's.

Run it rich, don't lean it out or you'll be looking for a new piston!

 

[o8f150]

Power head looks small for 103. Can you take the cyl cover off I want to see if it looks like the 667 I have.

it is a 603 solo with 103cc's not a 103

 

[o8f150]

Totally different saws...the 662 and 667 are on the same platform. The 670/680/690/603 are on the same.

The 680 and 690 will outrun the 603's.

Run it rich, don't lean it out or you'll be looking for a new piston!

I run all of my saws rich just for that reason,, sometimes to rich but that's better then to lean

 

[o8f150]

Did you touch up the chain.

no,,, it was just as sharp as it was with the first vid

 

[Miles86]

howdy:

If you need one, here is a parts manual-
http://www.ebay.com/itm/SOLO-MODELS...ultDomain_0&hash=item4ac29c1009#ht_1822wt_962


That is a really nice looking saw, I like all the red.

 

[sachsmo]

I have worked my azz off for the last 1 1/2 weeks to get the money together to get this,, this was an AS members saw,, we have talked about it for the last few months about me buying it since his shoulders are torn up,,, well the other day I was talking to mike about it and he agreed to sell it to me,, I offered 1 price and he said no that he would only take 100 less then my offer,,,WTH!!! counter offer 100 less??? well we are good friends and we trade off a lot of parts,, advice etc,,etc,,, this man is a good guy,,,,,, any who he got this at an auction last year for about 75.00,,, can you believe that and it was NOS,,, he took the huskie mount bar off and put in stihl mount studs and added this 36" b/c to it,, he had only run 1/2 dozen tanks through it,,, so I got the the saw,, original owners manuel and extra new stihl chain for,,,, heres the sucky part and I really think I got ripped off :hmm3grin2orange:,,,, 400.00,,, sure it won't get used much because of the weight but at least I have it to use when I do need it especially when we start cutting up the big logs here at the house,, ok,, now for the pics,, let the you sucks fly

View attachment 297063View attachment 297064View attachment 297065

Yes Sir,

I do remember when you was preachin' echos?

Welcome to the 6 cube club. "go forth and fear no evil"

 

[o8f150]

Yes Sir,

I do remember when you was preachin' echos?

Welcome to the 6 cube club. "go forth and fear no evil"

preaching echos??? whats that:hmm3grin2orange::hmm3grin2orange:

 

[cobey]

cograts Scott!!! super cool saw there!!! ps im glad you played with some echos, you had good info for me :biggrin:
have fun and be safe!!

 

[sachsmo]

preaching echos??? whats that:hmm3grin2orange::hmm3grin2orange:

How soon you forget weedhopper.

 

[cmarti]

Suck, suck, suck....but Iam happy for ya. Enjoy!