sawjunky23
Just here for the free beer!
2065 cylinder. Had mild transfer. cleaned up using MM method. Should run again. Free to anybody who can use it. I only ask for the price of the ride.
2016 Christmas giveaway
- Thread starter jerrycmorrow
- Start date
Help Support Arborist Forum:
brandonstc6
Addicted to ArboristSite
I am have a craftsman 1.9 top handle saw. It has good compression but no spark. You pay the ride and it's yours.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Matt_Ellerbee
ArboristSite Operative
I am have a craftsman 1.9 top handle saw. It has good compression but no spark. You pay the ride and it's yours.
Sent from my iPhone using Tapatalk
I would like this.
I'll have to pillage the shop tomorrow for something to toss into the mix.
brandonstc6
Addicted to ArboristSite
Interesting. I never noticed the location of the recoil handle on these until now.
brandonstc6
Addicted to ArboristSite
That is interesting, I've only seen 3 saws with the recoil done like that and two were Poulans. It's a neat saw, I knew someone would want it. It might just need the points cleaned and be good to go.
Sent from my iPhone using Tapatalk
Happy this was offered and claimed. These can actually be quite spunky little saws. Intake is reed valve but the exhaust can be improved upon. Fun to play with.
I'm very excited! I can't wait to get it! I'll pm you. Curious about the reed valve.
Sent from my iPhone using Tapatalk
clemsonfor
ArboristSite Operative
- Joined
- Dec 2, 2013
- Messages
- 436
There an old School 2 stroke intake type. Many older outboards used this type. like a reed. allows to suck in but not blow out.
So it still looks similar to a normal intake, but it basically has a check valve in it. I was curious because I've got an old stand up jet ski, and it is piston port, where the ones made after it were reed valve.
Sent from my iPhone using Tapatalk
clemsonfor
ArboristSite Operative
- Joined
- Dec 2, 2013
- Messages
- 436
The ones I have seen on outboards that's the case. Never messed with a saw one though.
dougand3
Addicted to ArboristSite
Round 2: Poulan / Craftsman Fuel Line Kit - fits most any 42cc or smaller saw from 1990-2010. Free Shipping to lower 48. Specify in PM which purge bulb is needed - Snap In or Screw In. Merry Christmas.
mortalitool
ArboristSite Guru
Ill post something up later on today. Im sure i have lots of goodies i dont need to keep.
Merry Christmas everyone ..
Lb7 dmax
ArboristSite Lurker
I have a not so pretty but seems to be complete clutch cover from a 345 to give. Maybe someone can use it? I'll cover shipping to lower 48.
clemsonfor
ArboristSite Operative
- Joined
- Dec 2, 2013
- Messages
- 436
Does anyone know if this will fit a 445? cause the brake doesn't work on my 445 and this would be a quick fix for me if it fits.
James Miller
Addicted to ArboristSite
If the item I posted is already shipped should I leave it off the list
1.) Mac 1-40 - @jerrycmorrow
2.) 2x 325 .058 carlton chains of any length - @nstueve
3.) 2x 325 .058 34LG oregon chains of any length - @atpchas
4.) 211 stihl parts - @brandonstc6
5.) Poulan Pro 295 (good compression) - @bowtechmadman
6.) 2x 3/8LP .043 GB R43S chains of any length - @atpchas
7.)5x 3/8 .050 full chisel oregon chain, 72 or 84dl you pick, used/like new--- @astnmacgto
8.)XL 12 parts,lots
9) A064 14" for 1/4" pitch chain OR New Oregon replacement sprocket nose for .325 chain @svk
10) Large flat rate of chains @ValleyFirewood
11) Poulan Fuel Line Kit (2) @dougand312) OEM H-142 top cover (mainewoods)
13) Poulan p3416 whole saw "unknown" operating condition @LonestartStihl
14) 621 piston - @MnSam
15. 346 xp top cover @stihlaficionado
16. Pipe tobacco @n240sxguy see post 118
Updated, items removed from list.
2.) 2x 325 .058 carlton chains of any length - @nstueve
3.) 2x 325 .058 34LG oregon chains of any length - @atpchas
4.) 211 stihl parts - @brandonstc6
5.) Poulan Pro 295 (good compression) - @bowtechmadman
6.) 2x 3/8LP .043 GB R43S chains of any length - @atpchas
7.)5x 3/8 .050 full chisel oregon chain, 72 or 84dl you pick, used/like new--- @astnmacgto
8.)XL 12 parts,lots
9) A064 14" for 1/4" pitch chain OR New Oregon replacement sprocket nose for .325 chain @svk
10) Large flat rate of chains @ValleyFirewood
11) Poulan Fuel Line Kit (2) @dougand312) OEM H-142 top cover (mainewoods)
13) Poulan p3416 whole saw "unknown" operating condition @LonestartStihl
14) 621 piston - @MnSam
15. 346 xp top cover @stihlaficionado
16. Pipe tobacco @n240sxguy see post 118
Updated, items removed from list.
Can you add my username behind the XL 12 parts?
Thanks
Your knives are top notch. Being a quality hand made piece like that means a lot. I'm not telling you what you should/shouldn't do but I think if you offer a knife up to the forum this year you should consider doing a raffle ($5 tickets) and donate the money (how you see fit) to a local charity of your choice. That would really 'pay it forward'. From the generosity I've seen on this forum and the quality of your knives I know it could help someone this time of year.
Merry Christmas everyone.
