2071 carb settings?

[SawTroll]

SawTroll,
If the saw has the ignition with the rev-limiter in it, that 13,000 RPM's is all that will show up on the tach. The ignition starts to cut out above 13,000, I try to set the high speed WOT between 12,500 and 13,000 RPM's, that way it is not too lean on the high side. It has been my experience that you can lean them out too much and the tach will still show no more than 13,000 RPM's. .....

Mine (372xpg, made week 8 2006 - blue coil) was at 13,300 the last time I checked, the specked max is 13,500, and the limiter should be at 13,600.