22 ton Husky hard starting fix

[Butch(OH)]

We have developed a 100% cure for our 22 Ton Husky starting problems.
First we removed the problem area and tossed it out back

Then we torched off everything that was used to attach the problem area to the splitter and installed some new irons to attach the fix

Then we installed the fix, L70 Yanmar diesel. It will come back off again as we have a few braces to install and grind the tank where the previous garbage,, I mean fine engine was attached. Have a pump mount coming from surplus center and that will be about it with the cure,, about forgot will need to attach my key switch for the lectric start. Will also be adding a fender and some shields to keep road debri out of the engine. Also going to add a log cradle while its in the shop. Oldest son said, why the heck didnt you just build the splitter from scratch??? Hate it when he is right, told him to go away..

 

[kodiak]

Dang, that's quite the fix! Mine was hard to start at first until I figured out the right technique. Yeah, I know, there shouldn't be any need for a special technique...

 

[Hinerman]

Mine was hard to start at first until I figured out the right technique.

Care to elaborate?

 

[Jim Timber]

Wanna send me the old engine?