pippin5267
ArboristSite Member
Earlier in the year, I rebuilt a scored 365 with a Balieys big bore kit. After rebuilding the saw and cleaning the carb, I tuned the saw a little ritch and put a couple tanks through it. The saw ran perfect. Probably about the third tank, I took it to my husky dealer and he set it to 13,500 on the tach. I have not used the saw in probably three months. I got it out the other day, gassed it up and starting using it. When it got hot, it sounded like it was over revving. When cutting at full throttle the engine would cut out like it was going to die and when I would let off the throttle it would go back down to idle. Hope the new p&c are not toasted. Where should I look first?