oneadam12
ArboristSite Guru
Well, I couldn't stand it any longer. I had to build a 4 way just to see if it would speed up my times. :hmm3grin2orange: Oh YEAH! I don't think I will mind splitting wood at all now. I did have a learning curve to deal with though.
1. Don't set the block all the way against the beam
2. Don't cut the slot in the vertical blade to big
3. Make sure you remember to square the plate on the bottom of the wedge BEFORE you weld it up
Here's a couple of pics
Oh yeah, I almost forgot
4. When you change wedges, Don't forget to measure OAL so that it isn't too long
1. Don't set the block all the way against the beam
2. Don't cut the slot in the vertical blade to big
3. Make sure you remember to square the plate on the bottom of the wedge BEFORE you weld it up
Here's a couple of pics
Oh yeah, I almost forgot
4. When you change wedges, Don't forget to measure OAL so that it isn't too long
Last edited: