I have 3/8 pitch carbide chain and 511 ax chain grinder where you could get a diamond wheel the arbor 7/8 and the max wheel diamater 5 3/4 inch.
thanks in advance for any help skooter.
thanks in advance for any help skooter.
I have 3/8 pitch carbide chain and 511 ax chain grinder where you could get a diamond wheel the arbor 7/8 and the max wheel diamater 5 3/4 inch.
thanks in advance for any help skooter.
I have used diamond abrasives on both steel and carbide in my saw blade sharpeners, drill bit sharpeners, Dremel bits, etc without ever having the abrasive surfaces load up. I know of local Stihl shops that routinely use the diamond wheels exclusively for all their chain sharpening.
Typically, diamond wheels are used strictly on carbides and CBN is used on steels. Some manufacturers produce a 'hybrid' wheel which is a special grit that will grind both steels and carbides (Typically used on parts that require grinding of carbide and steel at the same time). Plated diamond wheels are used on non-ferrous materials such as plastics, rubbers, nylons, fiberglass, etc.
Enter your email address to join: