OK John, but you can reset M-Tronic yourself, w/o any tools or going to the dealer, a nice feature IMO. So if the dealer close to you is not good with AT, that may be a consideration.
Mike its ok not to have the biggest, fastest, lightest, most popular, best of everything, really its ok. Are you like this with everything?
According to the Jonsered rep. Carb control will do a reset if present conditions are different from the last time the saw was ran. I.E. air temperature, or for example the bad-ass muffler mod I'm in the process of doing now.OK John, but you can reset M-Tronic yourself, w/o any tools or going to the dealer, a nice feature IMO. So if the dealer close to you is not good with AT, that may be a consideration.
I think i was a victim of takin the bait here that m-tronic was more reliable than auto-tune , ive heard alot of bad lately about m-trons and i know service guys you couldnt give an m-tronic saw , they hate them..i still say go with dealer support
According to the Jonsered rep. Carb control will do a reset if present conditions are different from the last time the saw was ran. I.E. air temperature, or for example the bad-ass muffler mod I'm in the process of doing now.
Not here.... $739ish before tax with 20" bar...$800 dollars? 562 is a $650 dollar saw new.
Around here we usually order them from spike60 or TLandrum for around $100 less than most dealers.Not here.... $739ish before tax with 20" bar...
I have never spent $800 on a saw. I was just trying get the most special awesome fastest reliable lightest saw there is available today for firewood. Everyone I know says the ms 362 is. They dont know about the cm model. I operated two different ms362's and liked them a lot. With that said I am going to purchase the 562xp and run it like crazy. Keep my 445 for a back up/ saw for my 14 year old son. I think its time for him to learn under very close supervision. I will definitely post my experience with it very soon I HOPE. I am going crazy with all this time on my hands because of the snow. I got too get back in the woodpile soon! LORD willing. I hope he is.
Got itKeep in mind what I said about the user manual, and keep it at WOT in decently sized wood for the first 3-5 minutes. Make sure you know the proper starting procedure, it is a bit different from many saws. Observe that there isn't any "off" posision, unless you disconnect the plug wire from the plug (doesn't really matter - except it is a nice feature when restartin a really warm saw).
According to the Jonsered rep. Carb control will do a reset if present conditions are different from the last time the saw was ran. I.E. air temperature, or for example the bad-ass muffler mod I'm in the process of doing now.
Spike60 ships with bar & chain. If I wanted one quick, I'd just go to the local dealer and cut the best deal I could.I still got to buy bar chain then get it shipped and I have to wait to get in the mail. I am chomping at the bit to get it. I might save twenty bucks but then I have to sit and stare at the mailbox.
Enter your email address to join: