To start I am wondering if I will have enough horse power to run a dual single stage pumps. One 1.5" inlet two 7/8 outputs. Each pump is rate for 20 gpm at 3500 psi at 3000 rpm. One pump for main pusher and other for 4 way and other stuff. Running a 4.5" cylinder with 3.5" shaft 30" stroke. I have the dump valve and 3/4 lines on main cylinder. To much flow to use a unloading valve with one of the pumps. With estimated efficiency of 85% for pump will it work or stall engine.
Engine 34 hp Kubota Diesel non turbo.
I am trying to copy the Built-Rite 24 HPWS-D splitter by using a old fairway mower engine. The mower was wore out but motor still has life.
Plan is to finish by spring with the build.
Engine 34 hp Kubota Diesel non turbo.
I am trying to copy the Built-Rite 24 HPWS-D splitter by using a old fairway mower engine. The mower was wore out but motor still has life.
Plan is to finish by spring with the build.
![d049bdf034246249ca969625b4bacc4c.jpg](https://proxy.imagearchive.com/173/1730da6b2798b8b570a8cb2d22b9db07.jpg)
![10cbc3e515ba3ca3f55efa7fa4d87555.jpg](https://proxy.imagearchive.com/aab/aab5fbbb57c49f7d5499ab804e857234.jpg)
![cf68fcab34bef508199ac422eff12099.jpg](https://proxy.imagearchive.com/ab2/ab22a470c6279dc31414f406d6c67673.jpg)
![b17203d0dcc83fb0da635c8495749f92.jpg](https://proxy.imagearchive.com/d1f/d1f4401f64752d4f7b980ef87b3cd798.jpg)