Any advice on changing out cutter wheel on carlton 4012/5014 ?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jaystihl

ArboristSite Operative
Joined
Sep 22, 2013
Messages
222
Reaction score
28
Location
fl
Hey guys i am going to change out the cutter wheel on my carlton 5014. cant find any instructions in the manual, so i was hoping someone here could lead me in the right direction. I have heard the bearings are a pain and will have to be pressed off the cutter shaft. im pretty sure its the same setup as the 4012 which has been out for quite a while. Any tips greatly appreciated.
 
Hey guys i am going to change out the cutter wheel on my carlton 5014. cant find any instructions in the manual, so i was hoping someone here could lead me in the right direction. I have heard the bearings are a pain and will have to be pressed off the cutter shaft. im pretty sure its the same setup as the 4012 which has been out for quite a while. Any tips greatly appreciated.
You might want to look into the Alpine Rhino wheel. I have a buddy that swears by them especially on low HP gas grinders.
 

Latest posts

Back
Top