ive realized as i keep getn firewood buyers that im going to be busy. im now lookin at getn 30 plus cord as soon as i can get on mtn, maybe 2 months off. my woods at 9000ft. also has me wonderin about fixed H on the 026.
ive also been doing tree a job here and there and my 359 is running good but i need to get the cylinder cleaned up before i run it any more. itl be tore down here shortly and sitn on the sidelines while the 026 and 310 do the tree jobs. i want it tip top for fireoowd time and wont risk burning it up over bur on my exhaust port. wich was my bad to begin with
so the real question, the 359 will be fixed and running the strongest come firewood time. itl be running both a stihl RSF full skip as well as a RSC. both 24" chains. i also have a 20" and rsc that will bwe mounted when aproriat sized trees are cut. and oregon full skip chisel chain
310 is running 25" bar. and can run the same chain aswell has haveing a windsor semi chisel full skip.
026 has an 18" bar RSF full skip(soon to be replaced with rsc)
both the 026 and 310 are muffler modded while the 359 that i ported completly blows them away.
are these saws enough saws for 30 cord. im hopeing they are. i will be tacklineg probly 24" maybe a hair bigger trees at the largest. i say that now till i see that great lookin fire wood tree thats 3 foot at the base.
i do want one more saw a 460 372 0r (066 660, maybe 650) but its looking like that wont happen till after i start filling firewood orders.
as side thought im wondering if im up for 4-8 cord per weekend for quite few weekends in a row. then some will get split. so maybe ill be the limiting factory not my saws.
im seeing the 359 as a killer firewood saw and im sure will see the most use unless the dreaded happens and i burn it up and have to resort to 357 top end.
anyways im just thinking outloud now.
thanks for all the help from everyone on this site.
thanks
Evan
ive also been doing tree a job here and there and my 359 is running good but i need to get the cylinder cleaned up before i run it any more. itl be tore down here shortly and sitn on the sidelines while the 026 and 310 do the tree jobs. i want it tip top for fireoowd time and wont risk burning it up over bur on my exhaust port. wich was my bad to begin with
so the real question, the 359 will be fixed and running the strongest come firewood time. itl be running both a stihl RSF full skip as well as a RSC. both 24" chains. i also have a 20" and rsc that will bwe mounted when aproriat sized trees are cut. and oregon full skip chisel chain
310 is running 25" bar. and can run the same chain aswell has haveing a windsor semi chisel full skip.
026 has an 18" bar RSF full skip(soon to be replaced with rsc)
both the 026 and 310 are muffler modded while the 359 that i ported completly blows them away.
are these saws enough saws for 30 cord. im hopeing they are. i will be tacklineg probly 24" maybe a hair bigger trees at the largest. i say that now till i see that great lookin fire wood tree thats 3 foot at the base.
i do want one more saw a 460 372 0r (066 660, maybe 650) but its looking like that wont happen till after i start filling firewood orders.
as side thought im wondering if im up for 4-8 cord per weekend for quite few weekends in a row. then some will get split. so maybe ill be the limiting factory not my saws.
im seeing the 359 as a killer firewood saw and im sure will see the most use unless the dreaded happens and i burn it up and have to resort to 357 top end.
anyways im just thinking outloud now.
thanks for all the help from everyone on this site.
thanks
Evan