So I got the MS 064. (See this thread: http://www.arboristsite.com/community/threads/milling-with-jonsered-2083-turbo.305519/ )
Now I need some help with a 36” bar and chain to go with it.
The local dealer recommended me to go low profile:
Bar: Stihl 36” 3/8”P 1,3mm (0.050) ES: http://www.lytek.dk/shop/svaerd-36-90cm-3969p.html (193 US$)
Chain: Stihl 3/8 1,3 mm - 5gr: http://www.lytek.dk/shop/savkaede-3-8-5171p.html (40 US$)
Would that be a good choice?
The LO PRO bar is quite expensive but I haven’t found I much cheaper. On the other hand. I can get a nice 36” 1.6mm (0.63) Iggesund R2 Pro bar for only 79$ ( http://www.dansk-skovkontor.dk/index.php?option=com_virtuemart&view=productdetails&virtuemart_category_id=0&virtuemart_product_id=8311 ) but I am concerned that the 064 will have trouble pulling a standard 3/8 ripping chain.
Any advice would be much appreciated
JC
Now I need some help with a 36” bar and chain to go with it.
The local dealer recommended me to go low profile:
Bar: Stihl 36” 3/8”P 1,3mm (0.050) ES: http://www.lytek.dk/shop/svaerd-36-90cm-3969p.html (193 US$)
Chain: Stihl 3/8 1,3 mm - 5gr: http://www.lytek.dk/shop/savkaede-3-8-5171p.html (40 US$)
Would that be a good choice?
The LO PRO bar is quite expensive but I haven’t found I much cheaper. On the other hand. I can get a nice 36” 1.6mm (0.63) Iggesund R2 Pro bar for only 79$ ( http://www.dansk-skovkontor.dk/index.php?option=com_virtuemart&view=productdetails&virtuemart_category_id=0&virtuemart_product_id=8311 ) but I am concerned that the 064 will have trouble pulling a standard 3/8 ripping chain.
Any advice would be much appreciated
JC