Baraboo Wisconsin old saw demonstration Badger Steam and Gas show

[heimannm]

Over 5 In³ direct drive saws

Mark

P.S. Scott - I happen to know that Bill already collect my "left overs" and will hold it for me until we bump into one another again...

 

[heimannm]

Hot saws, well at least 4 hot saws and two wannabees...

Kris (Nogoinback) is not a little guy, but that 101 torpedoed him on every up cut

Mark

 

[heimannm]

For all of you that have been following my Hot Saw / Kart Saw story, I made it through my three cuts without a mechanical failure. We will count that as success for 2013.

Brian (accidentally?) took a photo of himself today while he was collecting the other photos

Mark

 

[MathuisMaximus]

For all of you that have been following my Hot Saw / Kart Saw story, I made it through my three cuts without a mechanical failure. We will count that as success for 2013.

Brian (accidentally?) took a photo of himself today while he was collecting the other photos

Mark

I was there and have proof. I am the first guy standing to the left of the shield used for the purpose of which I believe is to stop a thrown saw chain. I was wearing the newest style of Dolmar cap available that I know of. I was there with my old man, and he was wearing a Ponsse cap.

 

[Bill G]

I will try to post a video of Brian and Art running their beautifully built Mercury KB saw. It is a fine, fine saw[video=youtube;KSAv3fjarL0]https://www.youtube.com/watch?v=KSAv3fjarL0[/video]

 

[Nogoingback]

Another awesome time with a great group of people.

My contribution for pictures but unfortunately no names or descriptions unlike the great job Mark does with his.

Had to hand off my camera to a friend before the start of the Hot saw race, this time I finally got to be a participant instead of just a spectator. Racing a Hot saw for the first time was one heck of an experience and a lot of fun too.

Link. 2013 Baraboo Chainsaw Display And Races Slideshow by NOCUREFORCAD | Photobucket

Tried to get pics of every one but it didn't work out that way. Sorry if I missed you.

Videos are up and pretty much just from the Hot saw class.

<iframe width="640" height="480" src="//www.youtube.com/embed/T3LIlMsFjSQ" frameborder="0" allowfullscreen></iframe>
<iframe width="640" height="480" src="//www.youtube.com/embed/WRnGfEqVb-E" frameborder="0" allowfullscreen></iframe>
<iframe width="640" height="480" src="//www.youtube.com/embed/noi9aMxTAGU" frameborder="0" allowfullscreen></iframe>
<iframe width="640" height="480" src="//www.youtube.com/embed/IoOlacefaj4" frameborder="0" allowfullscreen></iframe>
<iframe width="640" height="480" src="//www.youtube.com/embed/w5mM6D9MXik" frameborder="0" allowfullscreen></iframe>
<iframe width="640" height="480" src="//www.youtube.com/embed/Ye0wty7_lX8" frameborder="0" allowfullscreen></iframe>

 

[McC]

Will be back today, but I'll try to walk around the rest of the show, haven't done that yet. So I won't be at the display all day, but will be around the saws for a good part of the day.
Scott

 

[wendell]

Another great show as always. Thanks to everyone who had a part in making it happen!

 

[WetGunPowder]

Another great show as always. Thanks to everyone who had a part in making it happen!

Grantsburg on Saturday Wendell?

 

[ozflea]

Thanks for the pic's and video looks like you fellas enjoyed yourself's and nice weather to boot

McBob

 

[McC]

I ended up loading Roger's Vonruden hydraulic saw in my trailer to come home with me. I have always wanted one to hook to my JD B. Roger got this on ebay and asked if he could try it on my tractor. It is heavy and clumsy, but I still like it. Doesn't seem to pull the chain as hard as I thought it might, but I'll read the manual and see if we have it set up right.
Scott

 

[Bill G]

Thanks to all that posted videos. I hope there are more to come

Bill

 

[Bill G]

Anyone have anymore videos?

 

[McC]

There were some very close times this year including one tie, which was settled with a saw off. Our 2 time keepers Les and Steve Z4lunch were top notch with most of their stopwatches being within a few 100ths of a second. Times in the classes had most saws in the same ballpark.
Here are the results:
2-man saws:1 cut 24" silver maple
1 Steve, Disston 211 30.07 sec
2 James, Disston KB7 30.8 sec
3 Steve Disston KB6 36.98
4 James Disston 211 37.61
5 Roger Mac 940 40.73
6 Peter Mac 7-55 52.71
7 Josh Home Superwiz 1:01.35
8 Steve Mall 11 1:04.69
9 Paul Mall 6 1:20.9
10 Paul Pioneer Supertwin 1:23.8
11 Bob Mall 6 2:13.1 "first time in wood"

Gear drive saws 5cu & under, 14" poplar
1 Bill G Stihl 041G 8.14 sec
2 Bruce Home Superwiz 55 8.41
3 Mark Mac BP1 9.09
4 Mark Mac 2-10G 11.11
5 Art Poulan K100 19.9
6 Peter Lombard 26.38

Geardrive saws 5 cu & up 14" poplar
1 Bill G Home 3100 5.5 sec
2 Bill G Stihl 090G 7.01 won saw off
3 James Home super 1130 7.01
4 Bill G Home 770GS 7.88
5 Mark Mac 77 9.19
6 Mark Mac 55 9.58
7 James Mac 895 15.66
8 Peter Home 770GS 18.18
9 Roger Lombard 5 18.6
10 Josh Home 7-21 20.53
11 Scott Terrill FA 25.06

Direct drive 5cu & under 2 cuts 10X10 Silvermaple,
1 Scott Mac 250 13.07 sec "Dad"
2 Peter Mac 150 16.89 "Son"
3 Bruce Home 450 22.09
4 Roger Husky F70 22.31
5 Mark Mac SP81 22.48
6 James Mac D44 22.58
7 Bruce Mac 10-10 24.21
8 Bruce Pioneer Farmsaw II 25.70
9 Roger JD 66sv 47.1
10 Bruce Home XL 12 54.37

Direct drive 5 cu & up 3 cuts 10X10 silver maple
1 Mark Mac SP125 11.79 sec
2 Steve Z4lunch Stihl 090 11.96
3 James Home Super 650 14.15
4 Roger Husky 1100 17.95
5 Les Mac SP125 18.89
6 Bryce Mac 300 20.51
7 Tyler Home 650 23.45
8 Bruce Home C91 29.79
9 Zach Mac 1-71 45.66
10 Peter Clinton Wasp 45.86

Mini 40cc & under 2 cuts 4X4 pine
1 Bruce Stihl 015 5.7
2 Mark Minimac 25 6.45
3 Zach Wright/Poulan 20 9.24
4 ? Stihl 015 9.98
5 Squirt Craftsman 1.8A 10.30
6 Peter Remington Mighty Mite Electric start 13.41

Hotsaw 3 cuts 10X10 white pine
1 Les Mc101 5.43
2 Steve Z4lunch Mont Wards west bend 820 5.90
3 Chris nogoinback Mac 101 5.91
4 Scott McC Mc92 7.12
5 Mark MC40 7.34
6 Art MC91 10.89

 

[McC]

Chris has an awesome slideshow of the event here
http://s1132.photobucket.com/user/NOCUREFORCAD/slideshow/2013 Baraboo chainsaw display and races

 

[Bill G]

I shot 33 videos Saturday and I am in the process of up loading them. I set them uploading to youtube last night and at 1pm only 10 were done. I am going to try and post those 10. They all have generic titles and no description for now. When I get a chance I wil go back and edit with the details I remember.

Bill[video=youtube;3YWoEdaduWQ]https://www.youtube.com/watch?v=3YWoEdaduWQ[/video]

 

[Bill G]

Insert explanation here[video=youtube;KZzLQCVZ7p4]https://www.youtube.com/watch?v=KZzLQCVZ7p4[/video]

 

[Bill G]

Another[video=youtube;Cd1CY_ivbCg]https://www.youtube.com/watch?v=Cd1CY_ivbCg[/video]

 

[Bill G]

More[video=youtube;QxkbswSbwRI]https://www.youtube.com/watch?v=QxkbswSbwRI[/video]

 

[Bill G]

Fun for all[video=youtube;phSgsEkUgl8]https://www.youtube.com/watch?v=phSgsEkUgl8[/video]