LonestarStihl
Addicted to ArboristSite
I took a Bg86-C blower to my dealer who for $20 shop fee would look it over and see what it took to get running. Bought the blower for $4 so I'm not worried about its condition too much. Dealer called and said it had no compression and needed. Ew piston and cylinder...in its condition that's not happening.
The problem is I and another guy in the shop were very surprised at this because it "felt" like it at least has some compression. I have my own gauge on the way now to do my own test but the drop test so to speak held for a few seconds by the pull cord fine. I took pictures through the cylinder for y'all to take a gander and see if y'all see anything unusual for me.
Sent from my iPhone using Tapatalk
The problem is I and another guy in the shop were very surprised at this because it "felt" like it at least has some compression. I have my own gauge on the way now to do my own test but the drop test so to speak held for a few seconds by the pull cord fine. I took pictures through the cylinder for y'all to take a gander and see if y'all see anything unusual for me.
Sent from my iPhone using Tapatalk