Christmas time...

[eiklj]

Your part was sent out today....

I appreciate it and thank you. You're a good man.

je

 

[diggers_dad]

PM sent:msp_biggrin:

I'll get this boxed up and sent out. I should be able to put one or two more of these together for others in the next week.

dd

 

[diggers_dad]

Marc, still using the stuff you sent me. On the hunt for more containers, gonna check then dollar store. Them eye droppers are perfect. I've used a little of everything you sent me. Thanks again. Where'd you get all those screnches?

I stopped in at a local Dolmar dealer during the summer when no one was buying saws. He had a box of those priced at $2 each. There were 10 or so in the box gathering dust. I promptly relieved him of them and asked if he had more. I am very fortunate to have a Dolmar dealer in my little town, he's a good guy. I have several Stihl dealers around but only one that I care to really deal with. They are about 30 miles away but it's worth the trip. They also just started carrying Redmax saws.

 

[little possum]

Mr Stihlofadeal left a Echo 500 here with me this afternoon. Somebody needs it.

Saws out to Loco, Mo Jim, and hrhunter.

 

[little possum]

Echo is claimed

 

[mitch95100]

Bump... ill have to find some things.

 

[leecopland]

I'm in!

These are still available if anyone has use for them. I'm in northern ontario so they'd be better to go to Someone in Canada or the mid-west. To keep shipping down. Seems anywhere further would be cheaper to drive them there. View attachment 267355
View attachment 267356

I would be interested in the Homelite EZ and maybe the blower. I'm in Huntsville On where are you

Regards,

Lee

 

[leecopland]

112's still available?

Why would anyone want a 153?

It is only a little more than half a 290 eh?

I do have those 2 112 parts saws (no muffs or chain covers)


Bah Humbug!

I would be happy to receive one of those 112s. Share or pay shipping. P1H1B7 Ontario Can.

Thanks,

Lee

 

[Philbert]

Been out of the loop a bit with work, but will see what I have for this thread. I appreciate everything that folks have been offering, and picked up a few chains that will be used. Thank you very much.

Sending a PowerSharp demo kit to bigblackdodge, which somehow seemed to circumvent this thread. The ‘last of the stash’ from a Wisconsin GTG a year or two ago.

I have a never-used, Poulan Pro Control Tip / Replaceable Sprocket Nose bar: .325 pitch, .050 gauge, 16 inch nominal length, 18-1/2 inches overall. Marked “530-044337” “16 50 8878 GHN” “Made in Canada”. Weighs just under 2 pounds!

Yours for the cost of shipping.

Philbert

 

[RedneckChainsawRepair]

Been out of the loop a bit with work, but will see what I have for this thread. I appreciate everything that folks have been offering, and picked up a few chains that will be used. Thank you very much.

Sending a PowerSharp demo kit to bigblackdodge, which somehow seemed to circumvent this thread. The ‘last of the stash’ from a Wisconsin GTG a year or two ago.

I have a never-used, Poulan Pro Control Tip / Replaceable Sprocket Nose bar: .325 pitch, .050 gauge, 16 inch nominal length, 18-1/2 inches overall. Marked “530-044337” “16 50 8878 GHN” “Made in Canada”. Weighs just under 2 pounds!

Yours for the cost of shipping.

Philbert

PM was already sent.

 

[Eccentric]

PM was already sent.

Drat!!!

You're one quick motorscooter my friend.:msp_thumbup:

 

[locofrog]

i may have one of those bars somewhere lemme look ecc.

-loco

 

[axlr8]

here is my list of free for the shipping stuff

372 cylinder cover plastic---claimed!

NEW tecomec 051 cylinder and piston. Needs wrist pin, cir clips, and wrist pin bearing. and too be cleaned up

stihl 028 front tension clutch cover---claimed

the rear half of an 034 super muffler

Husky 359 FW

Stihl 066 filter base ---claimed!

used 372 air filter. good usable

usable 371K airfilter

and thats about it! PM for more details!!!

 

[Boogieman142]

Have had this for a bit now and it just sits there so it may as well go to someone that could use it. I had this before I got my 200t. It ran when I stopped using it but unsure now. Probably new carb kit as our fuel is soo awesome:msp_thumbup:. The bar and chain I would probably hold onto tho. spoken for

 

[MS460WOODCHUCK]

Have had this for a bit now and it just sits there so it may as well go to someone that could use it. I had this before I got my 200t. It ran when I stopped using it but unsure now. Probably new carb kit as our fuel is soo awesome:msp_thumbup:. The bar and chain I would probably hold onto tho.

PM sent

 

[Philbert]

Ooops!

Found another Oregon PowerSharp demo kit, lightly used! (This is really the last one!) Includes: 16" bar, chain, sharpening cassette, and stone.

*This model only works with smaller STIHL chainsaws running 3/8 low profile ('Picco') chain*. E.g.: MS170, MS180, MS021, MS210, MS211, and maybe some top-handled STIHL saws.
***Will NOT work with MS250 or larger saws.***

Great way to try out the system with low risk. Offered for the cost of shipping ($10 - $15). Because these were provided for evaluation, asking the recipient to also post feedback and their impressions, positive or negative, in one of the PowerSharp threads here on A.S.

Philbert

 

[djones]

Thank you for your kind words. My Dad raised us up helping other folks out when we could and I guess it just stuck. I hate to admit it, but I save stuff up all year just for this one thread. I have a few more things coming but wanted to spread them out.



The echo 330 EVL is spoken for but the Homelite is still available.

PM sent

 

[Warped5]

Mystery Gift #2 .........................................

Kind of a gag gift ...

Please PM me with Mystery #2 as your subject .... :msp_thumbup:

 

[Warped5]

tbone75 is our mystery #2 winner!

Congrats John!

 

[cutforfun]

Found another Oregon PowerSharp demo kit, lightly used! (This is really the last one!) Includes: 16" bar, chain, sharpening cassette, and stone.

*This model only works with smaller STIHL chainsaws running 3/8 low profile ('Picco') chain*. E.g.: MS170, MS180, MS021, MS210, MS211, and maybe some top-handled STIHL saws.
***Will NOT work with MS250 or larger saws.***

Great way to try out the system with low risk. Offered for the cost of shipping ($10 - $15). Because these were provided for evaluation, asking the recipient to also post feedback and their impressions, positive or negative, in one of the PowerSharp threads here on A.S.

Philbert

pm sent thanks