Correct Tire Swing Anchoring

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
PinkFloydEffect

PinkFloydEffect

ArboristSite Guru
Joined
Nov 26, 2009
Messages
905
Location
Earth
Is there a correct way of anchoring a tire swing to a limb without hurting the tree? Tire swings rock :)

tire20swing.jpg
 
PinkFloydEffect

PinkFloydEffect

ArboristSite Guru
Joined
Nov 26, 2009
Messages
905
Location
Earth
No. But through-hardware is best.

Thats a beautiful location for a swing.

Well I want one on my thinking tree, my old growth maple but I sure as hell am not running any bolts through my tree unless it's for a cable support. I think it's just something I need to get up there annually and move a few inches. Maybe use a cambium saver?
 
Ed Roland

Ed Roland

Addicted to ArboristSite
Joined
Feb 6, 2007
Messages
1,175
Location
zone 8a
Nah. As this thread progresses it will likely become more clear but destroying the cambium on the top side of the branch is way more destructive than running through-hardware. Hard to see at first but reflect on it.

Those mountains are idyllic.
 
PinkFloydEffect

PinkFloydEffect

ArboristSite Guru
Joined
Nov 26, 2009
Messages
905
Location
Earth
Nah. As this thread progresses it will likely become more clear but destroying the cambium on the top side of the branch is way more destructive than running through-hardware. Hard to see at first but reflect on it.

Those mountains are idyllic.

I guess your right, they are used for temporary climbing and rigging not a perminate fixture. A good old rope and moving it annually might be it.

And I did not take that photo but I would love to go there
 
treemandan

treemandan

Tree Freak
Joined
Oct 3, 2006
Messages
11,085
Location
chester co pa
I made a search to find the post I made about it but didn't find it so...

adynamic024.jpg


treesupportsystem004.jpg



those are straps designed to be used to cable trees and used with the cable rope


treesupportsystem005.jpg



Basically I used that to fortify the low limb which the swing would be attached to


adynamic026.jpg



adynamic022.jpg
 
M.D. Vaden

M.D. Vaden

vadenphotography.com
Joined
Oct 31, 2002
Messages
2,329
Location
Beaverton, Oregon
Might depend on variables.

How heavy are the people swinging?

How high is the limb? How thick is the limb?

If I used an eye-bolt all the way through, I'd sure want one that didn't tweak and stress the metal where the eye meets the limb. Maybe at least 5/8" double.
 
treemandan

treemandan

Tree Freak
Joined
Oct 3, 2006
Messages
11,085
Location
chester co pa
I personally think that is as correct as one can get. I made a few posts on the topic cause I see so many haphazzard ways. I can't remember what I named the posts but rest assured they are worth looking for.

I really do think that supporting the limb the swing is attached to is important also. I have never actually heard of an acccident with a swing but with the crap I have seen I am sure surprised.
 
Last edited:
Ed Roland

Ed Roland

Addicted to ArboristSite
Joined
Feb 6, 2007
Messages
1,175
Location
zone 8a
DAN, My light 4.5 year old girl would love that set up, in the right candidate. But you have to admit the friction/pressure is not exactly doing that limb any favors.
Besides, i believe we are talking about hanging a swing in an old maple, right, PFE? Through-Hardware, imo.
 
PinkFloydEffect

PinkFloydEffect

ArboristSite Guru
Joined
Nov 26, 2009
Messages
905
Location
Earth
That's wikid cool! I never ever thought about supporting the limb the swing is attached to thanks. Love the rigging photos, the only person swinging on it 90% of the time is me 115lbs. Look at the little kid go damn! He's guna grow up to be a tree man like his dad I bet. The board looks nasty but I like the classic tire :) I'll take pictures tomorrow of where I want the swing to be.

Yes woodW 1 if not both of my old growth red maples. And I don't "swing" I just kinda chill haha

Off topic and all but... can tree work be deducted on your taxes? Is it considered improving your property?
 
Last edited:
PinkFloydEffect

PinkFloydEffect

ArboristSite Guru
Joined
Nov 26, 2009
Messages
905
Location
Earth
I like the sound of that. Those moments are important.

It's the whole point of this tree, I used to climb into the crotch and sit in it but then I realized that all that up and down causes bark damage on old growths so I started sitting on the root flares because they are so massive now I'm board I want a tire swing to sit in. Tree means too much to me I won't allow any reckless swinging :hmm3grin2orange:
 
treemandan

treemandan

Tree Freak
Joined
Oct 3, 2006
Messages
11,085
Location
chester co pa
DAN, My light 4.5 year old girl would love that set up, in the right candidate. But you have to admit the friction/pressure is not exactly doing that limb any favors.
Besides, i believe we are talking about hanging a swing in an old maple, right, PFE? Through-Hardware, imo.

Actually there is little friction and the pressure is causes the limb to grow stronger... in theory.
 
treemandan

treemandan

Tree Freak
Joined
Oct 3, 2006
Messages
11,085
Location
chester co pa
I've tied rope swings using a bowline large enough that a girth hitch can be tied around the limb with the bowline hanging about a foot below the limb. This set up can be loosened ever year or so and moved a few inches. The rope does not move around on the limb when swinging and I've not seen any limb damage. If you can't visualize what I'm suggesting I'll send in a photo over the weekend.

Lets see !
 
treemandan

treemandan

Tree Freak
Joined
Oct 3, 2006
Messages
11,085
Location
chester co pa
The bowline is hanging about a foot below the limb....and the girth hitch is around the limb. The girth spreads the load over more limb and rope surface and stops rope movement. I suggest this set up be loosened up and moved a few inches every year or so.

attachment.php

pretty much how my swing is set but its only on a single line. More of a RB than a girth.
 
PinkFloydEffect

PinkFloydEffect

ArboristSite Guru
Joined
Nov 26, 2009
Messages
905
Location
Earth
The bowline is hanging about a foot below the limb....and the girth hitch is around the limb. The girth spreads the load over more limb and rope surface and stops rope movement. I suggest this set up be loosened up and moved a few inches every year or so.

attachment.php

Awesome! I figured I could move it out one year then back in the next year then back to its middle position the 3rd year and repeat.
 
BC WetCoast

BC WetCoast

Addicted to ArboristSite
. AS Supporting Member.
Joined
Oct 30, 2007
Messages
3,317
Location
Vancouver
Back when my kids were little and before I was in the tree care biz, I just screwed in a 1/2" eye screw from the hardware store. That was about 18 years ago. The limb's still there, the rope has since rotted away and the kids have graduated from university.
 
Top