Dolmar 540

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tbarber55

ArboristSite Lurker
Joined
Mar 9, 2003
Messages
13
Reaction score
0
Location
Ct
I'm thinking of replacing my Stihl 028 WB wondering how this saw compares ? What saw would be equivelent in Husky or Sthil ?
Thanks Tom
 
Last edited:
540 Dolmar

I just bought two Makita DCS520i chainsaws new in box but ten years old for a good price. These are blue dolmar 115i saw's which were replaced by the 540. The 520/115i saw's are real light and lots of power. I would say the 540 Dolmar should be compareable. I think the 540 is about 2cc bigger then the husky 355 rancher. someone correct me if Im wrong.
 
The dolmar ps-540 is one of the best power to weight ratio saws on the market. I have had good luck with them and we sell a bunch of them! The only complaint we ever here is they do leak some oil! But other than that it is a great performer!
 
Speaking of leaks

bar oil tha is, I fixed mine (520) easily by silicone gluing around the outlet from the oil reservoir.
 
520i

wish I had bought mine years ago. With a 16 in bar and full chisel chain in a 16 in seasond osage orange it pulls it self tru or bear down and you dont hear the rpm's drop either. And feel good at the end ot the day. This is my Idea of a limbing saw but good for then a lot more then that.
 
Doe's anybody know the HP of a 540 Dolmar and what is the
Sthil 028WB HP ? I don't want a saw with less power. I'm
happy with the power of the 028 but it's not worth fixing.
Thanks Tom
 
Hi Tom, the Dolmar 540 is about 6 cc larger than the 028WB, about the same weight also. I had a Stihl 028 super and a Dolmar 115i which is 2 cc smaller than the 540, my Dolmar was more powerful than the 028 Super but both are great saws. The 540 should be a nice step up in performance for you, but I too would like to know the actual weight and hp numbers for these saws. I think the only advantage the Stihl has over the Dolmar is dealer support but that is slipping where I'm from. The box stores are driving the small shops out of business around here.
 
How do I find were all the dealers are in Connecticut ?
There is one little shop not far from me , but if anything
happens to him then what ? I found one place that works on Makita he said buy another Sthil , but then again he sells Sthil.
Tom
 
Thanks for the info. My friend is buying me a Echo CS-520
for doing work at his house. What do you guys think of this saw ?
He only has a card good at Home Depot so my choices were very slim. I could of got a Makita but NO PLACE TO SERVICE THEM.
There are plenty of Echo Dealers though. Do you think I made a smart choice ? It's going to take a week to get the saw.
Thanks Tom
 
Dealers in CT are covered by our wholesaler in Brewer, ME.
RD Faulkner
Contact Alan Dall
146 Parkway South
Brewer, ME 04412
207-989-3792
 
Makita DCS520i is the same as a Dolmar 111i

<img src="http://www.arboristsite.com/attachment.php?attachmentid=23931&d=1117855599"width=550>
 
Last edited:
Im not for sure but I think some of the early 028WBs are 43cc. I had a service book from the library that showed the early AV and WB having 43cc then there was a note that said some later ones had 47cc. Im not sure does anyone know an easy way to tell? If your going by the Acres website, it list the WoodBoss as 47, but is this the early models? My028 with a 18" bar is about 16.25 pounds on my scales-pretty heavy. Im estimating a Husky 350 would be under 14 ( 3 lbs for a 18 B&C????).
 
Back
Top