Sold early stihl 064 coil #2-204-222-108 new or used working good condition

[r black]

As stated looking for a new oem or used nice , or good aftermarket coil #2-204-222-108 , i believe stihl part # 1122-400-1300 , i understand these are hens teeth, hoping some has one , or someone has successfully cloned an aftermarket from across the pond , ae: covid country that works , thank you , and hello to everyone been a while since i have been here , how is everyone doing ?

 

[dudz3636]

I looked and looked for a 1300 or alternative limited coil, including a WTB add on here for a number of weeks. No success. T_Fishaa may still have some 1201 flywheels that will work with the more readily available unlimited coils. I bought one from him for a reasonable price. I have a NIB 1203 dual key flywheel, but I paid out the nose for it from the UK...

 

[Meadow Beaver]

1300 is an unlimited coil, just buy a 0000-400-1300

 

[r black]

1300 is an unlimited coil, just buy a 0000-400-1300

i wish it was that easy , but those will not work

 

[Jacob J.]

i wish it was that easy , but those will not work

Does your case only have the mounts for the dogleg coil?

 

[r black]

Does your case only have the mounts for the dogleg coil?

Hello Jacob , was hoping you would come along ....i have read some of your prior posts, on the saws and coils yes this one just has the two mounting holes , on the lower left of the recoil , coil #2-204-222-108 , saw serial # 119242195 , according to the local dealer coil # 1122-400-1300, however not positive on the last part believe the saw was manufactured in 1988.

1300 is an unlimited coil, just buy a 0000-400-1300

no offense to you sir, i hope you are right , but the dealer stated it will not work , i have tried the one on e-bay from PRO-LINE that states its a 1122-400-1300, but will not bolt up from sawzilla parts

 

[Jacob J.]

Hello Jacob , was hoping you would come along ....i have read some of your prior posts, on the saws and coils yes this one just has the two mounting holes , on the lower left of the recoil , coil #2-204-222-108 , saw serial # 119242195 , according to the local dealer coil # 1122-400-1300, however not positive on the last part believe the saw was manufactured in 1988.

Ok, do your coil mounts look like this in the case?

 

[Bill G]

What are the part numbers on the flywheel and the coil you need? I am not asking about the part number in the IPL, I need the part number on the part.

 

[r black]

Ok, do your coil mounts look like this in the case?

Jacob only two holes on mine , i can get a picture this weekend, as needed

What are the part numbers on the flywheel and the coil you need? I am not asking about the part number in the IPL, I need the part number on the part.

coil #2-204-222-108 is the number on my coil never removed the flywheel as of yet all number's i have given are off my saw....... EXCEPT the coil # the shop states i need

 

[Meadow Beaver]

Only need 2 holes to mount the 0000 coil to. Take a pic of the coil you have now

 

[Mad Professor]

If an early case you can make an adapter. Run universal coil

Our friend from down under did. Photos credited to him, @L34.

 

[Mad Professor]

Only need 2 holes to mount the 0000 coil to. Take a pic of the coil you have now

Early 064 coils/cases had different bolt pattern. Some with 2 some with 3 bolt holes.

Some 046 coils will fit.

 

[Meadow Beaver]

Ahh yes I forgot about the difference, I have both coils but I never compared the two

 

[L34]

This is where my fly wheel is timed at TDC.
Running no key and universal coil

 

[r black]

Ok, do your coil mounts look like this in the case?

Jacob, here are some. pic's second pic's does have a third hole near the coil however I don't believe its a coil mount hole ?.......

 

[Jacob J.]

Jacob, here are some. pic's second pic's does have a third hole near the coil however I don't believe its a coil mount hole ?.......

It is a coil mount hole. So you could buy a used 0000 400 1300 universal ignition and that would work fine for you. Just swap your ignition lead over.

I usually buy used MS-290 coils because they're cheap:

https://www.ebay.com/itm/256209441241

 

[r black]

It is a coil mount hole. So you could buy a used 0000 400 1300 universal ignition and that would work fine for you. Just swap your ignition lead over.

I usually buy used MS-290 coils because they're cheap:

https://www.ebay.com/itm/256209441241

well thank you jacob , will it have timing or starting issues , is it bolt on and go ?

 

[r black]

Only need 2 holes to mount the 0000 coil to. Take a pic of the coil you have now

looks like you were right and i thank you also

 

[r black]

Also looking to trade out the stihl name and model on top cover and recoil .... with new ones any idea where to get the metal rivets as shown in pic.... and install tool ?

 

[jeremyallendean]