Echo CS 310

[svk]

Anybody own one?

HD has some real clean reconditioned units. Plus I can get it for less than this.

I need another saw as much as I need a third leg but it is a cute little saw.

 

[nomad_archer]

Anybody own one?

HD has some real clean reconditioned units. Plus I can it for less than this.

I need another saw as much as I need a third leg but it is a cute little saw.

View attachment 495167

Yes I have one. 14" bar stihl rs chain a simple MM and re-tune and it makes a great little saw. I sent mine to the hunting cabin with my dad. It's a good saw if you need it in a pinch. My dad loves running the little saw which is part of the reason he has it.

 

[mountainlake]

I got a CS352 off fleebay for $70 that just needed the caps pulled and tuned, really woke up with a muff mod as usual. 34cc and lots of snort now. Steve

 

[Chainsaw Jim]

I have one but I can't cut with it until I find a clutch drum.

 

[o8f150]

 

[Raganr]

Thats a good price. Paid half that for just a muffler last year. Not bad saws after removing the cat and with a decent chain.

 

[svk]

What bar pattern and how many DL in a 14" bar for these saws.

@o8f150 That sure opened it up. Must really be choked down in stock form.

 

[Raganr]

I believe the stock 14" comes with a 52 DL 3/8 LP chain. A041 mount. Not sure what they expect it to cut with the double safety humps, maybe bread?

I put GB 12" bars (from LCS) with 45 or 46 DL 3/8 LP Stihl PS chains. I did a thread on removing the cat. Be aware of welded muffler vs crimped....

http://leftcoastsupplies.com/product/12-gb-arbor-tech-bar-38lp-3/

 

[stubnail67]

I went to 3 depots and none were to be found here in fla at that price LOL

 

[quotedraven]

I stripped the bar studs on mine twice otherwise it is light.

 

[BGE541]

I believe the stock 14" comes with a 52 DL 3/8 LP chain. A041 mount. Not sure what they expect it to cut with the double safety humps, maybe bread?

I put GB 12" bars (from LCS) with 45 or 46 DL 3/8 LP Stihl PS chains. I did a thread on removing the cat. Be aware of welded muffler vs crimped....

http://leftcoastsupplies.com/product/12-gb-arbor-tech-bar-38lp-3/

That is awesome....

 

[svk]

I believe the stock 14" comes with a 52 DL 3/8 LP chain. A041 mount. Not sure what they expect it to cut with the double safety humps, maybe bread?

I put GB 12" bars (from LCS) with 45 or 46 DL 3/8 LP Stihl PS chains. I did a thread on removing the cat. Be aware of welded muffler vs crimped....

http://leftcoastsupplies.com/product/12-gb-arbor-tech-bar-38lp-3/

Those GB bars are both cheap and pretty! If I had any 041 pattern saws I would buy a lifetime supply!

 

[nomad_archer]

Those GB bars are both cheap and pretty! If I had any 041 pattern saws I would buy a lifetime supply!

Did you buy the cs310?

 

[svk]

Did you buy the cs310?

No. At least not yet.....

 

[nomad_archer]

No. At least not yet.....

Do it!!!!

 

[svk]

Do it!!!!

I have three saws at home in need of some type of repair. I really don't need another whether it is a runner or fixer!

 

[BGE541]

I have three saws at home in need of some type of repair. I really don't need another whether it is a runner or fixer!

Will you buy it and ship

 

[stubnail67]

Will you buy it and ship

its getting expensive to ship.... if i were him i would buy it and sell 2 of my older small saws.....i almost always buy a depot refurb every time....

 

[svk]

Will you buy it and ship

I would but I would think you would be better off finding a coupon and buying a new one out there.

 

[quotedraven]

I wouldn't recommend it. Better to get the clippers out