FarmerTec Huztl MS660 Updated Build Kit - Build Thread

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
man thats a beautiful saw. mg is drooling, where are you man? he is flashing you some saw p0-rn!

you are missing the squench holder. its a black knot of rubber that slips over the bar and you stick your bar wrench down it. the highlighted area has your part number and name if you want one. bling! works greatholder.JPG
 
i wanted to order something from thatgerman supplier. I wrote and asked if the part was made by farmertec. they avoided the question which is hard to do in writing. so i wrote them back and asked them to simply look at their invoice and let me know what the resukt was. Below is the email. That is really sad. dishonest retail.

abuse.JPG
 
I think I broke it :)
b13e957b714e8a8db79849165b698999.jpg


chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
 
That's how mine was when I first got it. Turned out it had the muffler gasket delete. Put in a gasket (and a big exhaust pipe) and no more drool!
I just tuned it. It slobbers during. I wondered if someone would catch it.

With this cylinder with the walbro, I had to abort the tune 3 times and reset. I kept running out of needle on the high side. The final was starting at 1.25 out on L and 1.5 on H and that left me enough needle to tune to 12500

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
 
I just tuned it. It slobbers during. I wondered if someone would catch it.

With this cylinder with the walbro, I had to abort the tune 3 times and reset. I kept running out of needle on the high side. The final was starting at 1.25 out on L and 1.5 on H and that left me enough needle to tune to 12500

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
That don't look like slobber, that looks like diarrhea.
 
Mine was a little over 11,000 when it arrived. After 10-15 tanks, I opened up the muffler to about 74% of ex. port area, then tuned it to about 12-12.5k with 1.2 turns out on both jets, FWIW. Took it to my saw guy and he said it sounded perfect to him. Saw seems stronger and stronger. :))))

Mine has Meteor P+C and a number of other upgrades (Oregon clutch, Taiwan crank, Olean bearings) and OEM (not sure what the exact breakdown is) but it seems like the guy who did it really knew what he was doing.
 

Latest posts

Back
Top