Wood Splitter
ArboristSite Lurker
Two Questions for the PROS out there.
1) What would be an adequate length for my conveyor system i bought it came in 4 pieces that are each 8 feet long but with no chain, will 16' be long enough. Because cost is an issue and it uses the double chain with the paddle in the middle of the two chains as the chain ride in the trough. So cost per foot of chain is a big issue.....
2) any ideas for the floor of the conveyor right now it has some rust holes in it which the wood will get caught on. Is there a material out there that i can lay down that will allow to wood to slide smoothly up the surface.
Thanks Guys
1) What would be an adequate length for my conveyor system i bought it came in 4 pieces that are each 8 feet long but with no chain, will 16' be long enough. Because cost is an issue and it uses the double chain with the paddle in the middle of the two chains as the chain ride in the trough. So cost per foot of chain is a big issue.....
2) any ideas for the floor of the conveyor right now it has some rust holes in it which the wood will get caught on. Is there a material out there that i can lay down that will allow to wood to slide smoothly up the surface.
Thanks Guys