watsonr
Addicted to ArboristSite
- Joined
- Jan 3, 2010
- Messages
- 7,088
- Reaction score
- 2,130
Total bars are tough to do a deal with and they only cut me a little slack and I'm not really sure if its worth doing... but you guys decide... I'll tell you what they would do. I can only compare the prices I saw on feepay to see if they were even close as I would rather get this out than hold it up even longer.
Shipping to you .. anywhere between Virginia and California is $12, covers anywhere in the lower 48. Doesn't include the cost of a box or packing materials and I believe its fair, some my be a little more, others a little less but I'm trying to keep it simple. That $12 includes the box, packing materials and shipping.. period (don't ask me to make an exception), if I ship it.... its $12.00... done! Guys in Canada, contact me directly with a PM (I think I can do it for $17).
They say I can mix and match mounts, tell me the mount you want and I'll order it if it's not listed below (Homelite, Poulan, Jonsered, McCulloch or something like that.. you do have to stick with the length I listed. I.E... I want Homelite D196 in 28"... great!) and that's if they have it. If its not listed, the answer is no, don't complain please... Just know I'll do my best! For these requests, give me the saw model.. Homelite XL-12, 20" 3/8 .050)
We're going to do 4 sizes of Total Brand Super Pro Sprocket Nose with replaceable tip.....16", 20", 24", 28" These are a solid bar, not laminated and I believe their best quality bar.
Dolmar/Husky in Large mount 3/8 .050 bars
T415FV4 for 16" $30 60DL
T417FV4 for 20" $40 72DL
T459FV4 for 24" $50 84DL
T423FV4 for 28" $60 93DL
Stihl (fits 026/028S/034/036/039/044/460/660 and MS260/270/280/290 (common mount for most saws)
T200PV2 for 16" .325 .050 $30 67DL
T200FV4 for 16" .375 .050 $30 60DL
T202PV2 for 20" .325 .050 $40 80DL
T202FV4 for 20" .375 .050 $40 72DL
T204FV4 for 24" .375 .050 $50 84DL
T241FV4 for 28" .375 .050 $60 91DL
Two sizes for the Husky/Dolmar in small mount Hard Nosed, non-laminated bar. Good solid bars that should last awhile. I don't know why the 20" hard is more than the 20" replaceable tip... but they don't have them in Super Pro and laminated bars are crap.
Fits 340/345/346/350/353/357 Hard Nosed non-laminated bars
T489HTU for 16" 3/8 or .325 .050 $30 60/66DL
T381HTU for 20" 3/8 or .325 .050 $53 78/72DL
Two sizes for Stihl to fit the smaller saws like 024S/026/028/290/390 (I think there the same size)
T200PV2 for 16" .325 .050 $30 67DL
T201PV2 for 18" .325 .050 $53 74DL
Don't ask me for some off the wall stuff or off the wall size besides what I posted. I want to make it simple and easy and keep the price as low as possible. I'll pay shipping to me, repackage the bar and you pay from me to you... simple.
If this works out without a big mess, I'll do Oregon next in bars or chain!
I need 5 Orders minimum to make this work.... lets go!
Edit: I'll run this until Sunday next week so everybody can get in. That's two Fridays so we don't miss a pay period. Nothing like a deal and don't have a dime to spend. ENDS Sunday night, MARCH 10th. Order goes out the next day.
Shipping to you .. anywhere between Virginia and California is $12, covers anywhere in the lower 48. Doesn't include the cost of a box or packing materials and I believe its fair, some my be a little more, others a little less but I'm trying to keep it simple. That $12 includes the box, packing materials and shipping.. period (don't ask me to make an exception), if I ship it.... its $12.00... done! Guys in Canada, contact me directly with a PM (I think I can do it for $17).
They say I can mix and match mounts, tell me the mount you want and I'll order it if it's not listed below (Homelite, Poulan, Jonsered, McCulloch or something like that.. you do have to stick with the length I listed. I.E... I want Homelite D196 in 28"... great!) and that's if they have it. If its not listed, the answer is no, don't complain please... Just know I'll do my best! For these requests, give me the saw model.. Homelite XL-12, 20" 3/8 .050)
We're going to do 4 sizes of Total Brand Super Pro Sprocket Nose with replaceable tip.....16", 20", 24", 28" These are a solid bar, not laminated and I believe their best quality bar.
Dolmar/Husky in Large mount 3/8 .050 bars
T415FV4 for 16" $30 60DL
T417FV4 for 20" $40 72DL
T459FV4 for 24" $50 84DL
T423FV4 for 28" $60 93DL
Stihl (fits 026/028S/034/036/039/044/460/660 and MS260/270/280/290 (common mount for most saws)
T200PV2 for 16" .325 .050 $30 67DL
T200FV4 for 16" .375 .050 $30 60DL
T202PV2 for 20" .325 .050 $40 80DL
T202FV4 for 20" .375 .050 $40 72DL
T204FV4 for 24" .375 .050 $50 84DL
T241FV4 for 28" .375 .050 $60 91DL
Two sizes for the Husky/Dolmar in small mount Hard Nosed, non-laminated bar. Good solid bars that should last awhile. I don't know why the 20" hard is more than the 20" replaceable tip... but they don't have them in Super Pro and laminated bars are crap.
Fits 340/345/346/350/353/357 Hard Nosed non-laminated bars
T489HTU for 16" 3/8 or .325 .050 $30 60/66DL
T381HTU for 20" 3/8 or .325 .050 $53 78/72DL
Two sizes for Stihl to fit the smaller saws like 024S/026/028/290/390 (I think there the same size)
T200PV2 for 16" .325 .050 $30 67DL
T201PV2 for 18" .325 .050 $53 74DL
Don't ask me for some off the wall stuff or off the wall size besides what I posted. I want to make it simple and easy and keep the price as low as possible. I'll pay shipping to me, repackage the bar and you pay from me to you... simple.
If this works out without a big mess, I'll do Oregon next in bars or chain!
I need 5 Orders minimum to make this work.... lets go!
Edit: I'll run this until Sunday next week so everybody can get in. That's two Fridays so we don't miss a pay period. Nothing like a deal and don't have a dime to spend. ENDS Sunday night, MARCH 10th. Order goes out the next day.
Last edited:
