Chris Carswell
New Member
- Joined
- May 22, 2024
- Messages
- 2
- Reaction score
- 1
I recently bought a 1989 Husqvarna 50 special from my cousin but it didn't have a chain and I'm in dark when it comes to the ins and outs so could someone please help me out
It has an Oregon bar 18 in that has 180sdea041 and beside that is j7 it also says .50" but the chain he give me says IB . I'm pretty sure the chain or bar doesn't go to it I finally got it on the saw and whenever I pull the chain around the bar it's making a clicking sound near the clutch and I think maybe the drive tooth number maybe diff.sure that saw came with .325 pitch chain for somewhere between a 15in bar to 18in bar. You need to know what bar you have which should be stamped on the bar near the clutch cover.
if there is no serial number on the bar take your saw to a local saw shop that can make chain and they will make you one to fit the bar.
ya pretty sure that bar takes a 62dl 3/8lp chain and you probably have a .325 sprocket on the saw.It has an Oregon bar 18 in that has 180sdea041 and beside that is j7 it also says .50" but the chain he give me says IB . I'm pretty sure the chain or bar doesn't go to it I finally got it on the saw and whenever I pull the chain around the bar it's making a clicking sound near the clutch and I think maybe the drive tooth number maybe diff.
Enter your email address to join: