Surely you are pulling our leg sir, you bought the real thing and are just messing with our minds. Congrats on the new toy anyway.It’s a Husqvarna 365 special, tool kit, 18”, .063” husky bar, husky decals?
I tend to lay a nail or two under the feet of the Farmertec fanboys that have the whole catalog of saws and just had time to put a tank of fuel in either one.is it a real one or a clone? My first saw I bought (from fleabay) was a chusqvarna and it had every problem you could think of. it was sold as being primarily a husky with a few aftermarket parts. in reality it was a clone with a few OEM parts. it had an OEM carb, clutch, oiler and bar. the rest was pure CCP. so I had problems with the flywheel (out of balance and the magnet was worthless), leaking seals, and after I broke it down it had way too much slop between the bore and the piston in my opinion. I finally gave it to a friend who needed a saw. after I changed the flywheel the seals and the rings.. it is what it is a cheap copy.
I was merely giving you the opportunity to advance more than get the bug of buying.I see messed up specs, some say the 365 is 65cc others say it’s 70.7 cc. I heard you can put the 372 jug piston on the 365.
My Husqvarna orginal 365 cuts good.
Not messed up at all, both are correct. The difference Is the era the saw was manufactured. The older 365’s were indeed 65cc’s, the newer x- dork models are 70.7 cc’s.I see messed up specs, some say the 365 is 65cc others say it’s 70.7 cc. I heard you can put the 372 jug piston on the 365.
My Husqvarna orginal 365 cuts good.
That’s my plan.So whats wrong using the 365 to its pace and than upgrade it to a nikasil 76cc popup jug?
If it's possible that is...
I bought a genuine 365 special from a saw shop in Rome, NY back in 2010 or 2011, $500 PHO. Wished I’d bought the whole pallet.A clone Husqvarna 365 special husky bar, $308 free ship? It’s orange too and 70.7 cc?
Enter your email address to join: