Want to Sell Husky 266, 162, 50mm thin rings

[marti384]

I have 3 NOS husky thin rings. I think they are for a 266 since it seems like they would fit a 50mm bore nicely. $60 shipped to the lower 48.

 

[smokey7]

Judging by the gap when showing 50.51mm I'd bet they are 48mm 625,630,162se type rings what do ya want for em?

 

[marti384]

That gap was with them already compressed a little with the jaws of the caliper. I will see if I have a 48 mm jug to try them in later tonight. I didn't know there was a 162 thin ring option. Or maybe I forget there was.

 

[president]

That gap was with them already compressed a little with the jaws of the caliper. I will see if I have a 48 mm jug to try them in later tonight. I didn't know there was a 162 thin ring option. Or maybe I forget there was.

early 162s were thin ring latter ones were not

 

[marti384]

Here are some pics. Too big for 48mm (1st pic). Second pic is them at the bottom of a 50mm jug.

 

[smokey7]

Weird don't look like it's right for either. Wonder if there was a 48mm thin ring saw?

 

[marti384]

I know the gap looks big on the 50, but if I recall a 181 thin ring I had also seemed to have a bigger end gap than a thicker ring. I think I still have some 181 thin rings and a jug, if so I will post up a picture of that fit later.

 

[president]

I know the gap looks big on the 50, but if I recall a 181 thin ring I had also seemed to have a bigger end gap than a thicker ring. I think I still have some 181 thin rings and a jug, if so I will post up a picture of that fit later.

are the thin rings new and for sale,hows the jug?

 

[marti384]

Here is what the gap looks like on a 181 with new thin rings. Similar in appearance to the 50mm jug and the other rings from the previous picture, about 2mm.

 

[marti384]

are the thin rings new and for sale,hows the jug?

Hadn't really considered selling the 181 thins, but I'll think about it. I have two new ones and four used but re-usable ones. The bore of the jug is nice, but the bottom of the intake port is chewed up and it looks like it might have a thread repair for the spark plug. It was a runner when I got it.

 

[bplust]

Weird don't look like it's right for either. Wonder if there was a 48mm thin ring saw?

Yes, some 162's had a pair of thin rings.

 

[marti384]

50 mm thin rings still available

 

[president]

Thanks Martin
I think I will go for a 288 upgrade after considering it
Keith

 

[marti384]

Bump

 

[huskyslinger]

what do you want for just 2 of them?

 

[marti384]

what do you want for just 2 of them?

Kinda was hoping to sell all of them together, but you can PM me an offer on 2.