husky 346 picco 3/8lp sprocket?

[chaugnar]

is there a 3/8 low profile or picco sprocket for a husqvarna 346.

 

[caricob]

is there a 3/8 low profile or picco sprocket for a husqvarna 346.

Just get a regular 3/8 sprocket and a low pro bar and you're good to go.

 

[blsnelling]

FWIW, Piltz uses a regular 3/8 rim.

 

[caricob]

I've been running a regular 3/8 on my 346 for a couple of years with low pro chain with no problems.

 

[CR888]

FWIW, Piltz uses a regular 3/8 rim.

So were taking tips from piltz now are we!lol Your right though!!

 

[blsnelling]

So were taking tips from piltz now are we!lol Your right though!!

Sad, I know. That's why I prefaced it with FWIW, lol. Obviously, not much

 

[chaugnar]

so according to piltz a ms 250 can run a 25 in bar mebbe this 346 will run a 30?

 

[fordf150]

That I'm aware of there are no lp/picco rims other than the Stihl mini spline.

Run a standard 3/8 rim. It doesn't match up perfect but it will work

 

[treesmith]

so according to piltz a ms 250 can run a 25 in bar mebbe this 346 will run a 30?

36" easy

 

[SquareFile]

Small hub picco sprocket.

 

[chaugnar]

where can i get that 8 tooth sprocket.my stihl guy cant get it.

 

[blsnelling]

Small hub picco sprocket.

View attachment 456173 View attachment 456174

Show off!! Lol

Have you considered making a batch of those and selling them?

 

[Franny K]

I've been running a regular 3/8 on my 346 for a couple of years with low pro chain with no problems.

Are you running Stihl chain? I think a 346 is a bit more than Oregon or others rate their chains for.

 

[Franny K]

Small hub picco sprocket.

View attachment 456173 View attachment 456174

Let's see the other side. Looks to me those picco sprockets are designed to discourage that. At least the 7 tooth ones I have.

 

[SawTroll]

Just get a regular 3/8 sprocket and a low pro bar and you're good to go.

That sprocket is too small for lo-pro/picco, so it is about like running with a sprocket that is worn way past its useful "life".

 

[SawTroll]

FWIW, Piltz uses a regular 3/8 rim.

He's an idiot, so that's no surprice!

 

[SawTroll]

GB are selling Standard 7-spline lo-pro/picco rims, but I don't know if they are selling Small 7-spline ones.

 

[RedneckChainsawRepair]

3/8LP works perfect on reg 3/8 7 and 8 rims.

 

[RedneckChainsawRepair]

Used to do 60cc saws that way back in 07 or so. Here was the latest 60cc I switched over and back. Also switched some echos 39cc 45cc from 325 to 3/8LP.

No special rims needed IMO to run 7T or 8T.

 

[Adirondackstihl]

I have a BN small spline Picco rim somewhere. If I can find it, you can have it.
It's a STIHL rim