Husky/Jred roller guide

[Deleted member 149229]

I use the Husky/Jred roller sharpening guide and really like. I happened on an article online about them and it said not recommended for skip chain. I’ve used mine on 75jgx with great results. Any idea why they said this? Thanks.

 

[chipper1]

I use the Husky/Jred roller sharpening guide and really like. I happened on an article online about them and it said not recommended for skip chain. I’ve used mine on 75jgx with great results. Any idea why they said this? Thanks.

No idea.
I can see why using the non-progressive style wouldn't work so well since you wouldn't have another cutter at close for the rakers, but the progressive style isn't dependent on another tooth for rakers or cutters.

 

[MGoBlue]

As mentioned on another site, it's for the raker guide side. It has no cutter to butt up against on skip.

 

[chipper1]

As mentioned on another site, it's for the raker guide side. It has no cutter to butt up against on skip.

You don't need a cutter to butt up against, just put the raker in the hole/slot.

 

[Yotaismygame]

That’s strange. I’ve used it several times on skip. Eventually I bought the husky raker gauge on its own.

 

[MGoBlue]

You don't need a cutter to butt up against, just put the raker in the hole/slot.

It'll work, I've done it. But that's the reason he read what he read.

 

[chipper1]

It'll work, I've done it. But that's the reason he read what he read.

Get that.
Wonder where he went?

 

[MGoBlue]

Get that.
Wonder where he went?

He's on far wood hoarders and o pee E.