Sold Husqvarna 372xp Ported

[NewEngland ChainSaw Works]

The cylinder has been port mapped, ported, smoothed and chamfered to make sure the piston will not snag a ring. The muffler has also been ported for flow. The power head has been pressure and vacuum tested so it doesn't leak when brought to operating temperature. None of the safety features have been modified so it can be used reliably for work. All of the other features work including the chain break, operator presence lever, kill switch, oiler, choke, and tensioner. It has a 20" 3/8 bar and new chian. Who ever gets this saw will not be disappointed. Don't hesitate to ask any questions.

I am asking $550

THANK YOU
​

 

[gary courtney]

who ported?

 

[NewEngland ChainSaw Works]

who ported?

We did it in house.

 

[Ironworker]

Do you have pictures of the port work and what exactly was done to it.

 

[cus_deluxe]

sounds like a real nice runner and a great price, good luck!

 

[skippysphins]

Saw runs very nice ! What year of production is this saw?

 

[skippysphins]

The race 372 in front on the stihl signs .
Love it

 

[NewEngland ChainSaw Works]

Saw runs very nice ! What year of production is this saw?

it is a 2002

 

[NewEngland ChainSaw Works]

Do you have pictures of the port work and what exactly was done to it.

 

[fin460]

were the uppers touched? glws Great price on a stock saw, and since its ported it should sell fast.

 

[windthrown]

Damn, I am in CAD remission. I need to call my sponsor!

 

[NewEngland ChainSaw Works]

were the uppers touched? glws Great price on a stock saw, and since its ported it should sell fast.

The exhaust and transfers are raised slightly.

 

[Clyde S. Dale]

Helluva price for a ported 372. Is the base gasket deleted? What does that saw blow for compression?

GLWS.

 

[NewEngland ChainSaw Works]

Helluva price for a ported 372. Is the base gasket deleted? What does that saw blow for compression?

GLWS.

The base gasket was deleted, and the compression is 155 psi.

 

[Deleted member 117362]

The base gasket was deleted, and the compression is 155 psi.

Base gasket delete, no run time. Your compression seems low.

 

[NewEngland ChainSaw Works]

Base gasket delete, no run time. Your compression seems low.View attachment 485538

I noticed if I go higher with the compression, the saws tend to run hot. But, if someone requested more I would do it.

 

[Deleted member 117362]

I noticed if I go higher with the compression, the saws tend to run hot. But, if someone requested more I would do it.

Thanks for the reply, I will watch my temp and see how it runs. May have to lower mine by adding a gasket. Your saw cuts great.

 

[gary courtney]

 

[NewEngland ChainSaw Works]

Thanks for the reply, I will watch my temp and see how it runs. May have to lower mine by adding a gasket. Your saw cuts great.

Thanks Boss.

 

[cgraham1]

Base gasket delete, no run time. Your compression seems low.View attachment 485538

Looks about right to me for a 372xp. They tend to run about 140 with a gasket.