terpjr
ArboristSite Lurker
I have a 562 XP that is having trouble idling, sometimes, and re-starting hot sometimes.
The saw runs great, plenty of power, and...for the most part...runs as it should.
Sometimes, however, it has trouble idling between cuts and then is difficult to re-start.
It is winter here and I heave read about the saw needing to be re-set at the change of season.
I tried cutting for 5 min at full throttle but it did not change performance.
Any tips?
The saw runs great, plenty of power, and...for the most part...runs as it should.
Sometimes, however, it has trouble idling between cuts and then is difficult to re-start.
It is winter here and I heave read about the saw needing to be re-set at the change of season.
I tried cutting for 5 min at full throttle but it did not change performance.
Any tips?