Eccentric
Mister Wizard
Can anyone here provide us the CR/SKF/National/etc industrial #'s for these Husqvarna crank seals?
1)503 26 02-04 as used on the 61/266/268/272 saws. These saws use common 6202 bearings.
2)503 26 02-05 as used on the 281/288XP and 285/1100/2100/298/2101 saws (and probably others). These saws use common 6203 bearings.
I have National 471466 and SKF 6904 numbers for another saw series (Poulan 4200-8500) that uses the 6203 bearings. Those should work, as long as the seal body width is compatible. Can anyone confirm this (or say it won't work)?
I'm going to be picking up some other seals at the local bearing house (SKF 4913 seals for a Poulan Micro and a Homelite XL2) and would like to be able to pick up some seals for my 288XP, 2100CD, and Poulan 5200 at the same time.
Thanks.
1)503 26 02-04 as used on the 61/266/268/272 saws. These saws use common 6202 bearings.
2)503 26 02-05 as used on the 281/288XP and 285/1100/2100/298/2101 saws (and probably others). These saws use common 6203 bearings.
I have National 471466 and SKF 6904 numbers for another saw series (Poulan 4200-8500) that uses the 6203 bearings. Those should work, as long as the seal body width is compatible. Can anyone confirm this (or say it won't work)?
I'm going to be picking up some other seals at the local bearing house (SKF 4913 seals for a Poulan Micro and a Homelite XL2) and would like to be able to pick up some seals for my 288XP, 2100CD, and Poulan 5200 at the same time.
Thanks.