Husqvarna question "288's"

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
looked up part # g033a4, dos not show on k&n 's web site. but i think you can still get them under a diff #. i'll go down to the shop again tomorrow and get the measurements and cross it. now you just need to find yourself a blue top.;)
 
K&Ns part number is RU3450 and for the new style kit is RU3460. Thanks again for all your help. Anybody got pictures of the blue tops you are referring to? What about the carb # I posted is it correct for 288
 
K&Ns part number is RU3450 and for the new style kit is RU3460. Thanks again for all your help. Anybody got pictures of the blue tops you are referring to? What about the carb # I posted is it correct for 288

HS226A75 is the Tillotson HS # that you're asking about here. I can't remember if HS226A is one of the 288XP carbs.
 
Good to see you have right carb on it. Sorry about the 226 /// 225 stuff. My post 347 is not right.

fwiw,
Have seen sometimes (not alot) the throttle plate shaft wear bore in body and show up as tuning problesm, plate not opening all way. Runs good, then doesn't, etc. Hard, careful look with carb in hands to see slop or plate jamming beforefully open.
 
The link shows quite a few IPLs for the 288. Knowing the year your saw was made is useful, probably even necessary :msp_ohmy:.
thanks for the links
Husqvarna Chainsaw Parts List Directory


Dating your Husqvarna threads link.

http://www.google.com/#sclient=psy&...gc.r_pw.&fp=18775b43b0670ef8&biw=1093&bih=499


This google search shows quite a few 288 lite threads, some focus on the carbs.

http://www.google.com/#sclient=psy&...gc.r_pw.&fp=18775b43b0670ef8&biw=1093&bih=499
 

Latest posts

Back
Top