FarmerGrant
ArboristSite Lurker
Seller says it's 72cc and a model 72. Is this a 272? Do these have internal clutch? What's it worth? Has a new looking 24" husqvarna bar.
Thanks
Thanks
Husqvarna Saw ID
- Thread starter FarmerGrant
- Start date
Help Support Arborist Forum:
Guido Salvage
Supreme Saw Whoreder
I am no Husky expert, but I believe the 272 had air injection and a plastic brake flag. The starter cover looks like it is off an older CD saw.
FarmerGrant
ArboristSite Lurker
I Couldn't find any pictures of a 272 that liked like it. Sorry for the poor image quality, that's all I have.
Chris_In_VT
Brrraaaaap!
Actually the 272 did not have air injection. Early models might have had the metal brake flag but most I've seen were plastic. It could also be a 266/268, those are very similar as well but if he says it's a 72 and he's honest then it's a 272xp. Might have had a 272 top end swapped on also.
Chris_In_VT
Brrraaaaap!
It will have an outboard clutch regardless though.
If it's all original, 268. I've never seen a 272 with a metal flag.
Welder56
Addicted to ArboristSite
By zooming in on the tag I see a 66 and part of a se. I'm guessing 266se?
Could he check by the ignition on the saw? 266s have a 2 part ignition system do they not?
Could he check by the ignition on the saw? 266s have a 2 part ignition system do they not?
The " 66" on the tag makes me think 266se. I wonder if the top cover bolts are lining up.
The shiny but decal-less top cover could be aftermarket. And I've never seen black spikes.
FarmerGrant
ArboristSite Lurker
Well I'm looking for a larger power head for my Lewis winch, or for my Alaska mill. Outboard clutch is a deal breaker for the winch. I have a super xl on the winch now.
I'm putting a 372 top end on my 365, I could swap that between the winch and mill.
He's asking $325 for the mystery saw.
I'm putting a 372 top end on my 365, I could swap that between the winch and mill.
He's asking $325 for the mystery saw.
Bill G
ArboristSite King
Are you having trouble with the SXL on the winch.? I have a near new one on a Lewis
FarmerGrant
ArboristSite Lurker
No problems, haven't used it much though. Just want more power.
backhoelover
Free service manuals and service tool info
how many cc is that 3100 is it bigger then the 1050
backhoelover
Free service manuals and service tool info
114 sweet
The 272 never had a silver ID tag since these were not being used after 1987 and the 272 came out in the early 90's.
FarmerGrant
ArboristSite Lurker
So this is a pre 87 266?
Chainsaw Jim
CJ Saws, LLC
I think the word "type" in front of the 66 wouldn't be so close if it were 266. It's probably an original 66.
SawTroll
Information Collector
Seller says it's 72cc and a model 72. Is this a 272? Do these have internal clutch? What's it worth? Has a new looking 24" husqvarna bar.
Thanks
The top cover looks like a 268 or 272, but the number plate on the case is not from a saw that late.
It actually looks like it is from one of the elusive 166 SE saws, that some sourses say was made 1978 - 1981 or so?
Frankensaw?
FarmerGrant
ArboristSite Lurker
Thank you everyone for the help!
