crpncoop
ArboristSite Lurker
I'm in the process of building a new splitter. I've acquired a 5 1/2" cylinder at a great price. I realize it's overkill, but it want it to split big, knotty oak rounds if need be...and it was cheap. I also have a 8HP engine which in all likelihood won't be used on this project. If I do go with the 8HP, I could run a 16gpm two-stage pump with a cycle time of 21 sec. That's pretty slow. My other thoughts are that if I upgrade to a 12HP engine, I could run a 22gpm pump at a cycle time of 16 sec or a 16-18HP engine with a 28gpm pump for a cycle time of 12 sec. Suggestions for the best engine/pump setup?