vw_motorsports
ArboristSite Guru
Well my first time selling in a long time.....
Jonsered CS2145 chainsaw. Saw was completely broken down and rebuilt and brought to Jonsered CS2152 specs using the best factory parts. This saw does not have the magnesium cases of the 353/CS2152 saws. They use the same piston and cylinders of the 353/2152 saws. Saws is equipped with an 18" bar and chain.
Jonsered CS2145, has the standard starter, no spring assist.
Specs:
Husqvarna 353/Jonsered 2152 oem factory flat top piston and late model factory 353 cylinders w/3 bolt muffler provision.
Husqvarna 353/Jonsered 2152 late model factory 3 bolt non-cat muffler for more power and cooler operation.
Husqvarna 350/Jonsered 2150 lower engine cradle
Husqvarna 353, 346xp/Jonsered 2152, 2153 late model intake with steel intake clamp
Both have unlimited coils and fully adjustable oil pumps
Base gasket delete for increased power
Late model oem Zama carburetor
Carb limiters trimmed.
New fuel line and fuel filter
Completely disassembled, cleaned, inspected and tuned.
A Stock 353/2152 is 3.3hp, with the restrictive catalytic converter mufflers and base gasket. These saws have a base gasket delete and freer flowing non-cat mufflers.
Some hp numbers from other saws.
husqvarna
445 2.8hp
450 3.2hp
early 346xp 3.4hp
545 3.35hp
It's a nice saw, the 3 bolt non-cat muffler is important in my opinion, solves muffler issues......I was lucky to find a dealer that had a couple of these $50 mufflers.
PRICE is $220 , plus actual shipping I normally do fedex.
Jonsered CS2145 chainsaw. Saw was completely broken down and rebuilt and brought to Jonsered CS2152 specs using the best factory parts. This saw does not have the magnesium cases of the 353/CS2152 saws. They use the same piston and cylinders of the 353/2152 saws. Saws is equipped with an 18" bar and chain.
Jonsered CS2145, has the standard starter, no spring assist.
Specs:
Husqvarna 353/Jonsered 2152 oem factory flat top piston and late model factory 353 cylinders w/3 bolt muffler provision.
Husqvarna 353/Jonsered 2152 late model factory 3 bolt non-cat muffler for more power and cooler operation.
Husqvarna 350/Jonsered 2150 lower engine cradle
Husqvarna 353, 346xp/Jonsered 2152, 2153 late model intake with steel intake clamp
Both have unlimited coils and fully adjustable oil pumps
Base gasket delete for increased power
Late model oem Zama carburetor
Carb limiters trimmed.
New fuel line and fuel filter
Completely disassembled, cleaned, inspected and tuned.
A Stock 353/2152 is 3.3hp, with the restrictive catalytic converter mufflers and base gasket. These saws have a base gasket delete and freer flowing non-cat mufflers.
Some hp numbers from other saws.
husqvarna
445 2.8hp
450 3.2hp
early 346xp 3.4hp
545 3.35hp
It's a nice saw, the 3 bolt non-cat muffler is important in my opinion, solves muffler issues......I was lucky to find a dealer that had a couple of these $50 mufflers.
PRICE is $220 , plus actual shipping I normally do fedex.