lets get Christmas started early this year

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Dang Ted, you always post stuff when I am away. Just got done boxing up the Echo 3000 I gave away a couple of pages ago and you offer up this. Message sent, I suspect I am too late.

Anyone need some short bars? Going to pick a few out of my pile and see if there is any interest.
Yes
 
I was actually referring to things that had already been posted. Sorting through 40 pages takes a while. :) I won't argue if you want to post up more stuff though. :D

Still got the craftsman 3.7 parts saw. And still have not shovled my way to the shed to find the bars and chain :(
 
Here is a decent 44mm p/c for an 028. Good shape, except the collar screw thread (for the top cover) is wallowed out. Not a Tecomec as the box suggests, this is a Mahle cylinder. Open to anyone, except Terry. o_O

JK, Terry included. First PM/Conversation.

DSC07925_zps710d3690.jpg
 
Last edited:
I posted earlier in the thread offering up a couple of P26's and a 1200 to whoever wants to pay shipping. Here are some pics of the 1200. The broken handle mount is not part of the case.

DSC_0227_zpsf9e86692.jpg


DSC_0226_zpscd87ad81.jpg


DSC_0225_zpsdf9b6923.jpg


DSC_0224_zpse84ae652.jpg


DSC_0223_zps3ec9a7e8.jpg


I guess I don't have pics of the P26's. The electronic ignition version is all there except for the AF and AF cover and in pretty good shape with spark. The plastic elbow/fuel inlet on the carb is cracked though. The points ignition P26 is busted up pretty bad, but there are still some usable parts. Will try to get pics of them this week.
 
Tools claimed now.
#3. Screwdriver--Shawn D
#4. Crimp tool--larhog
#5. Sidecutter --Jeremy
#6.--Diagional cutters---lwn9186
#7 needle nose---Rory

Still have adjustable wrenches Claim both if you want them so I can ship in flat rate box.

Adjustable wrenches claimed now.
 
2 sets of the following to the first 2 to open ocnverstaions:
3/8" .050" 59DL chain, inner bar plate, and tip guard for Homelite. All except the bar plates are a little rough but the chains seem to have an 'H' stamped on them. I guess someone made chains for Homelite at some point - I'm not sure.

1st two get a set.

Also available 2x 70DL chains as above, condition varies but should have a little life left. I believe that these are all for Homelite saws.

2nd two get the 70DL chains only.

Merry Christmas!
 

Latest posts

Back
Top