Lost HP
- Thread starter mountainlake
- Start date
Help Support Arborist Forum:
TNANCE there's more to how a saw feels than just it's power. The 310 is an OK saw, but it's not a real screamer stock. Best thing to do is keep the chain sharp and the carb tuned correctly. If you're still not happy with the saw you can always open up the muffler, or sell it and buy a pro saw.
Also you need to get yourself to a GTG and run a bunch of different saws to get a better feel for them.
Also you need to get yourself to a GTG and run a bunch of different saws to get a better feel for them.
volks-man
Arboristsite.com Spooner
yeah, yeah.
i have an echo cs-440 at 45 cc that would probably run right with a stock 290, if not the 310.
drive up here with your 310 and we'll try em' out.
:greenchainsaw:
MostShady1
Addicted to ArboristSite
middle east coast where? I'll put my 260Pro against that echo!
SawTroll
Information Collector
It is at 9.5K, providing the carb is correctly adjusted, and then dropping off very fast on both sides of that rpm number, unlike some (most) other saws - why are you surprised??
It is a POS saw!
Last edited:
bbdropshot
ArboristSite Lurker
.....shot out of a cannon down the mountain into a tornado?
Now that's funny!!
bcorradi
Arboristsite.com Sponsor
Huh imagine that mr. mountainlake and scott are pickin on stihls . We haven't seen that before have we?
. We haven't seen that before have we?
SawTroll
Information Collector
Huh imagine that mr. mountainlake and scott are pickin on stihls
No! Surely not! :greenchainsaw:
Some Stihls are good, others are not, just like other brands - what is your problem?
Last edited:
It is at 9.5K, providing the carb is correctly adjusted, and then dropping off very fast on both sides of that rpm number, unlike some (most) other saws - why are you surprised??
It is a POS saw!
Find a saw that will hold 9.5 k or more in the cut, then you'll know what 4 hp is.
It is a POS saw!
Find a saw that will hold 9.5 k or more in the cut, then you'll know what 4 hp is.
bcorradi
Arboristsite.com Sponsor
No! Surely not! :greenchainsaw:
Some Stihls are good, others are not, just like other brands - what is your problem?
ST - why are you chimin in?
Please tell me why these saws are a POS? Is it reliability, power to weight, sales? Also tell me how many of this family you have run and how many hours you have on them?
Am I saying these are the same quality of the pro saws? No, but they are at a considerably less pricepoint and do very well for their intended purpose. Just because a saw doesn't meet your weight and power criteria..its pretty bold and crude to state that they are a POS. I will say you do have good book facts, but you definately lack the mechanical knowledge and experience using the saws your demeaning.
Well, it's incredibly hard to imagine there being a bigger POS than a 45-50cc echo, the 45-50 cc echos being the real benchmark of a sluggish cutting saw, but the echo crowd are claiming their 45-50cc echos are matching an MS310 for power. Wow, that suggests the poor little 310 is an incredibly weak saw!
But, then again, I'm picking the echo crowd are spending too much time on the wakky bakky, coz they're also claiming their 45-50cc echos can match an MS260 for power! Next thing they'll be claiming a 60cc echo can match a 361... or a 70cc echo can match a 372... best lay off that wakky bakky echo guys, it's makin' ya' all delusional
But, then again, I'm picking the echo crowd are spending too much time on the wakky bakky, coz they're also claiming their 45-50cc echos can match an MS260 for power! Next thing they'll be claiming a 60cc echo can match a 361... or a 70cc echo can match a 372... best lay off that wakky bakky echo guys, it's makin' ya' all delusional
spacemule
The Peanut Gallery
Saying something is "lost" is implying that it was ever there to begin with.
You owe me some gtood beer then!
That's going to be a heavy load for you, 2 cases of gtood beer( I hate this keyboard, it keeps putting in letters that I didn't, kinda like Stihl putting 4 hp on the 310 when it isn't there) and that overweight 310. Steve
All right, I'm sorry i bought a pos saw. On the other hand it took owning a pos saw and buying 20 acres to get me interested in saws and this site. I would love to tryout anything better except it would only make me want more lol!!
miking
ArboristSite Operative
I wouldn't call it that. It's the sawyer that does the work, not the saw.
